What did you do to your NBS GMT800 Tahoe/Yukon Today?

[DurrtyBurB]

Threw some 20’s off a 2019 Ram Laramie
Added some center caps off an Aveo

View attachment 250767

 

[Sam Harris]

Threw some 20’s off a 2019 Ram Laramie on the Suburban.

View attachment 250718 View attachment 250719

Those look good!

 

[BADRIDES]

Threw some 20’s off a 2019 Ram Laramie on the Suburban.

View attachment 250718 View attachment 250719

Didnt know Dodge had same bolt pattern as Chevy.

 

[iamdub]

Didnt know Dodge had same bolt pattern as Chevy.

Yup. Since 2019 when they went to 6 lug.

Speaking of, y'all ever notice how similar a lot of the newer wheels look? The new GM, Ford and Nissan wheels all look like slightly tweaked versions of each other. Probably all sourcing from the same Chinese factory now. Ford kept their own lug pattern, RAM said "Eff it, we'll take GM's pattern". Nissan/Infiniti has had the GM pattern for years.

 

[Merc1973]

Replaced plugs and wires at 277k yesterday. And ordered the Fram ball-less PCV valve, can't believe I never changed it since I've owned it. Old plugs were Autolite double platinum n gap was 0.08...a little worn. Plugs were not easy to get out. Air ratchet came in handy. New plugs installed with anti-seize and dielectric grease on boot ends.

I used:
Ac Delco single platinum gap to 0.04
Denso ignition wires

 

[treehan77]

Replaced plugs and wires at 277k yesterday. And ordered the Fram ball-less PCV valve, can't believe I never changed it since I've owned it. Old plugs were Autolite double platinum n gap was 0.08...a little worn. Plugs were not easy to get out. Air ratchet came in handy. New plugs installed with anti-seize and dielectric grease on boot ends.

I used:
Ac Delco single platinum gap to 0.04
Denso ignition wires

What year is your Tahoe? I think mine must not have the pcv valve? I guess I’ll have to take off the valve cover to clean the orifice someday. Which spark plug model #?

 

[Redfire Metallic]

is anybody running these wheels, could you post pics. thanks

View attachment 249225

U posted that bout a month ago but here u go

 

[mattbta]

U posted that bout a month ago but here u go

View attachment 250740

Looks good...same ones I have on mine. I couldn't get a picture because at the time, mine was still down with the heads off awaiting me to put the reman'd ones in.

 

[Merc1973]

What year is your Tahoe? I think mine must not have the pcv valve? I guess I’ll have to take off the valve cover to clean the orifice someday. Which spark plug model #?

It's a 2003 5.3. Plug model number is 6.

 

[Scottydoggs]

Yup. Since 2019 when they went to 6 lug.

Speaking of, y'all ever notice how similar a lot of the newer wheels look? The new GM, Ford and Nissan wheels all look like slightly tweaked versions of each other. Probably all sourcing from the same Chinese factory now. Ford kept their own lug pattern, RAM said "Eff it, we'll take GM's pattern". Nissan/Infiniti has had the GM pattern for years.

theres a few cases where ford wheels fit gm cars too. mustang wheels fir w body cars. them bullets look damn nice on a grand prix or regal. the w bodys are 115.5 MM and the ford wheels are 114.7 iirc.

used cheaper stang wheels for my dr's. as they are wider then gm wheels. and i got em cheap.