What did you do to your NBS GMT800 Tahoe/Yukon Today?

[gat0r]

If you figure it out lmk. I have a couple camshafts I’d like to use for something besides garage ornaments.

towel rack ?
make a end table, use cams for legs
add some hooks or bent parts/tools to make a hat/coat rack
weld 2 together & make a steampunk sniper rifle to hang on wall lol

 

[Sam Harris]

Well buddies 408 totally ate the crank. The rods were also magnetized but the shop un-magnetized them and the new eagle crank is balanced and ready to install.

Still going to be awhile before either this 408 or my 370 will be done but I like checking in on them weekly. And I figured carnage pics are always cool.

This is multiple surfaces of the crank not just one. That's how the shop determined low oil pressure was the cause of the failure. View attachment 252407 View attachment 252408 View attachment 252409

Holy shit. Block is ok though, sounds like? Excellent!

 

[05Single]

If this photo was in an article for the 2021 Tahoe interior I would believe it.

I loosely based it off a Mercedes interior , not sure which one this is. I seen this and knew I wanted a few different colors mixed all together

That looks really good. Almost makes you want it to be dark all the time lol.

Well we’re starting to gain daylight here but still not very much lol.

that looks so damn good!

Thank you , I’m super happy with the outcome

Wow. Are there details on the light above the glove box that I missed?

I think in my build thread. It’s a led grille badge I built into the airbag cover.

Daaaamn. Looks great man!! Patriotic too. [emoji106][emoji631][emoji16]

Yes sir MURICA!!!

I like it, I like it, I LIKE IT!!!!!!!

dont be mad lol

Haven't done anything since I put my lights in. I need to get started on my interior lights. Yours came out great @05Single! I have bulbs to do mine in white. Need to get the gauge face without blue tint and I will be ready to go...

View attachment 252410

Yea I searched for this specific one, it’s called an led upgraded version of the Escalade face. So it has clear marking and no blue tint except just the turn signals iirc .... @Thatsquishykid717 might remember

 

[Dantheman1540]

have the shop or a school use it for show-n-tell

Ehhh To lazy to go find a school that would be grateful of my contribution.

View attachment 252414

That is awesome I may seriously do something like this! I have some blown up rotary engine parts laying around for art as well might be able to combine some stuff.

Holy shit. Block is ok though, sounds like? Excellent!

Amazingly the block checked out okay which is lucky.

 

[rgosart]

Yea I searched for this specific one, it’s called an led upgraded version of the Escalade face. So it has clear marking and no blue tint except just the turn signals iirc .... @Thatsquishykid717 might remember

This is the gauge face that I need I think...

https://www.ebay.com/itm/LED-Editio...emotionZeroArw&_trksid=p2047675.c100005.m1851

Only thing I am not sure about is trans temp. I know it is possible to activate in the cluster, just not sure if all that is within my skills or not.

 

[Sam Harris]

This is the gauge face that I need I think...

https://www.ebay.com/itm/LED-Editio...emotionZeroArw&_trksid=p2047675.c100005.m1851

Only thing I am not sure about is trans temp. I know it is possible to activate in the cluster, just not sure if all that is within my skills or not.

Trans temp should be pnp. The sensor is already there. We’re just missing the gauge on our models. Wait.. this is just an overlay. You’d still kneed the actual gauge.

 

[rgosart]

Trans temp should be pnp. The sensor is already there. We’re just missing the gauge on our models. Wait.. this is just an overlay. You’d still kneed the actual gauge.

I know I will still need the stepper motor and needle. I thought in an 05 you had to buy an eeprom programmer to activate it. Thread I am referencing is here:

https://www.tahoeyukonforum.com/threads/update-to-adding-trans-temp-gauge.110600/

 

[Dantheman1540]

My center cap finally came! Only took a full 4 weeks. Now I can get the truck washed and feel good about it.

 

[HiHoeSilver]

I know I will still need the stepper motor and needle. I thought in an 05 you had to buy an eeprom programmer to activate it. Thread I am referencing is here:

https://www.tahoeyukonforum.com/threads/update-to-adding-trans-temp-gauge.110600/

Yessir.

 

[rgosart]

Yessir.

Have you done it with your truck?