What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Sam Harris]

So I’ve had a recurring P0455 for months. It comes and goes.. y’all are probably saying: this sounds familiar.. why are you repeating yourself..?

So replaced the gas cap a couple weeks ago. I didn’t clear it, intentionally, expecting it to clear on it’s own. It didn’t.. After about a week, I got sick of it, and cleared the code.

All good until today, when I filled my tank. So, no joke, as soon as I cranked the engine, there’s my familiar CEL.

Since I’ve replaced the gas cap, and since the CEL illuminated immediately after filling the tank, I’m thinking it’s the solenoid.

Anyone have any thoughts / opinions on how likely it is the solenoid..? Something else..? I know the possibilities, just hoping for an easy fix. I doubt I’ll have to replace the canister and all, since I never have trouble filling the tank, but realize there are a few possibilities here.

 

[Sam Harris]

So, I couldn’t help myself, and even though I’m in excruciating pain from my POS back (can I get a new one please!?!!)... today I installed my trailer hitch. A few bucks over a bill, and hopefully a good amount of added protection from clowns not paying attention.




I’ve gotta admit, even though it’s super low profile, I’m still not happy with the look. Oh well, it serves a couple purposes.. i may try removing the stickers at least. That would help some. (After my back returns to “normal”)...

 

[Tonyrodz]

So, I couldn’t help myself, and even though I’m in excruciating pain from my POS back (can I get a new one please!?!!)... today I installed my trailer hitch. A few bucks over a bill, and hopefully a good amount of added protection from clowns not paying attention.




I’ve gotta admit, even though it’s super low profile, I’m still not happy with the look. Oh well, it serves a couple purposes.. i may try removing the stickers at least. That would help some. (After my back returns to “normal”)...

Are you gonna tow anything Sam?

 

[Doubeleive]

So I’ve had a recurring P0455 for months. It comes and goes.. y’all are probably saying: this sounds familiar.. why are you repeating yourself..?

So replaced the gas cap a couple weeks ago. I didn’t clear it, intentionally, expecting it to clear on it’s own. It didn’t.. After about a week, I got sick of it, and cleared the code.

All good until today, when I filled my tank. So, no joke, as soon as I cranked the engine, there’s my familiar CEL.

Since I’ve replaced the gas cap, and since the CEL illuminated immediately after filling the tank, I’m thinking it’s the solenoid.

Anyone have any thoughts / opinions on how likely it is the solenoid..? Something else..? I know the possibilities, just hoping for an easy fix. I doubt I’ll have to replace the canister and all, since I never have trouble filling the tank, but realize there are a few possibilities here.

Sam the bottom line is you either have to bite the bullet for a smoke test (which may not tell you anything) or start replacing parts, you can try the easy one first it's about $25-30 for the solenoid on the intake under the hood, if that doesn't do it then you gotta move on to the canister and vent solenoid. all 3 parts oem runs you about $200.00 a smoke test is usually about $100 then your still going to need to replace parts (if the source is found) or end up replacing them anyway. It's kind of a dammed if you do and dammed if you don't. it's not hard to do, easier than it looks. The kicker is it takes about 3 days for that code to clear for sure once the problem is found. The system has to pass evap 3 times starting cold and then getting hot (rinse and repeat) if you have the tech2 you can do the evap test but it's a pain in the ass, ac power has to be connected, you have to prep the tech2 for the test, start the truck cold, hold the rpms between 2k~3k for a period of time, yada yada

 

[ks03]

Rock auto sells an ACDELCO 2141091 (rectangular style vent solenoid) for $17... hardly worth messing around testing with an intermittent failure.

 

[Sam Harris]

Are you gonna tow anything Sam?

I’m planning to buy a small trailer for trips to the HW store for sure. Other than that, no real plans. But you never know.

 

[Teamiez]

Looks like rust but its the coolant sitting,, autozone brand

I noticed that after I posted was still to early in the am lol...I have a duracrap water pump from autozone on my Tahoe as well been there for a year and roughly 10,000 miles so far.

 

[Rocket Man]

So, I couldn’t help myself, and even though I’m in excruciating pain from my POS back (can I get a new one please!?!!)... today I installed my trailer hitch. A few bucks over a bill, and hopefully a good amount of added protection from clowns not paying attention.




I’ve gotta admit, even though it’s super low profile, I’m still not happy with the look. Oh well, it serves a couple purposes.. i may try removing the stickers at least. That would help some. (After my back returns to “normal”)...

Your truck didn’t already have a receiver?

 

[Sam Harris]

Your truck didn’t already have a receiver?

Nope. And I liked it that way. Lol. But it’s good to have.

ETA: it does, however, have the 7-pin wiring harness all nicely tucked away in the frame rail, ready to plug in! So that’s a big plus. Don’t know the RPO code off hand, but I’m sure it’s on my build sheet.

 

[Fless]

Nope. And I liked it that way. Lol. But it’s good to have.

ETA: it does, however, have the 7-pin wiring harness all nicely tucked away in the frame rail, ready to plug in! So that’s a big plus. Don’t know the RPO code off hand, but I’m sure it’s on my build sheet.

Your trailer light circuits should work fine; those are usually already fused. But if you ever need to add a brake controller and/or a 12v feed to the trailer, there are wires near the underhood fusebox that will need to be connected, and large fuses installed. Doesn't sound like you'll need those at this point, though.