What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,614
Reaction score
47,126
Location
Central Jersey
That's odd, get under there and shake stuff make sure nothing came loose
This is the 1st time I've been on a highway since it's been aligned. I kind of felt it driving away after the alignment was done but I thought it was just because of the tire swap--having to get used to it again.
 

Dantheman1540

Full Access Member
Joined
Feb 13, 2020
Posts
4,856
Reaction score
10,502
Location
Sugar Loaf Mountain
Yes, also a little twitchy too I think. Have any ideas I could tell these guys to tighten or adjust? Or is it calling for parts replacement you think?

Well mines needed the Belltech bushing kit for the UCAs. You grind the adjustment slots a few millimeters then press in new bushings. Should give you another 2-3*of caster adjustment which is what mine needed. I just haven't gotten to go get it aligned and checked yet. I maxed out both adjustments when I did the new bushings and it already feels better, curious to know what the machines says.
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,614
Reaction score
47,126
Location
Central Jersey
Well mines needed the Belltech bushing kit for the UCAs. You grind the adjustment slots a few millimeters then press in new bushings. Should give you another 2-3*of caster adjustment which is what mine needed. I just haven't gotten to go get it aligned and checked yet. I maxed out both adjustments when I did the new bushings and it already feels better, curious to know what the machines says.
I had new moog uca installed.
 

Dantheman1540

Full Access Member
Joined
Feb 13, 2020
Posts
4,856
Reaction score
10,502
Location
Sugar Loaf Mountain
Thought the steering wheel was “keyed” so that it goes on in only one spot? Unless he was talking about a different spot to move the wheel?


Sent from my iPhone using Tapatalk

Not 100% sure, hard to find pictures of it but it looks like it's just splined evenly all the way around from one video I watched. Guess I will find out if the alignment doesn't straighten it out.
 

Dantheman1540

Full Access Member
Joined
Feb 13, 2020
Posts
4,856
Reaction score
10,502
Location
Sugar Loaf Mountain
I had new moog uca installed.

But they didn't have the Belltech alignment bushing kit installed did they?

You may not need them I didn't feel like I did until I did the coilovers which may have lowered it more than I know. Like an idiot, I forgot to take before measurements.

91pgxWJQ-9L._AC_SL1500_.jpg
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,614
Reaction score
47,126
Location
Central Jersey
But they didn't have the Belltech alignment bushing kit installed did they?

You may not need them I didn't feel like I did until I did the coilovers which may have lowered it more than I know. Like an idiot, I forgot to take before measurements.

91pgxWJQ-9L._AC_SL1500_.jpg
I didn't get the Belltech kit, just a stock setup.
 

Forum statistics

Threads
132,350
Posts
1,866,512
Members
96,976
Latest member
BreBoyz

Latest posts

Top