What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Rocket Man]

Stell chasing gremlins after the new engine

View attachment 277887

What’s going on?

 

[Bear77]

Did the 03+ Footwell light retrofit mod today.

View attachment 277875View attachment 277876

Didn’t know there was footwell lights for the rear...


Sent from my iPhone using Tapatalk

 

[Bear77]

Stell chasing gremlins after the new engine

View attachment 277887

Do not like this


Sent from my iPhone using Tapatalk

 

[Mezzo]

Very nice! I did the fronts, but not the second row. How hard was that part?

It was actually pretty simple followed this guide step by step and copied the wiring loom and design and made 2 of them, 1 strip sits under the front,and then about 4 feet split off to go to the back seats. Like the guide did I went with chinesium amazon LED strips instead of standard 194 bulbs,and to make sure that the adhesive will last bought a roll of high strength 3M doublesided and cut pieces to fit each strip to make sure it would bond for good since the adhesive that with the strips was absolute crap.


https://www.tahoeyukonforum.com/threads/03-footwell-lights-or-00-led-footwell-upgrades.23834/

 

[Mezzo]

Didn’t know there was footwell lights for the rear...


Sent from my iPhone using Tapatalk

Now there is

 

[treehan77]

Finally got a reply from Goodridge stating they were going to send me some convex/concave washer to fix the leaking issue others have experienced with the center SS hose from their kit 14175. Hopefully it comes soon and is a fix. We shall see! Seems like the kit needs to be updated either way…

Edit: I will post the part # of the washer if it fixes the issue etc if they supply the item number.

 

[Sam Harris]

Finally got a reply from Goodridge stating they were going to send me some convex/concave washer to fix the leaking issue others have experienced with the center SS hose from their kit 14175. Hopefully it comes soon and is a fix. We shall see! Seems like the kit needs to be updated either way…

Edit: I will post the part # of the washer if it fixes the issue etc if they supply the item number.

Excellent!! Agree, that washer / spacer should be included in the kit in case it’s needed! I didn’t even think of contacting them, just had another line made, but I’m glad you did.

 

[Rocket Man]

Finally got a reply from Goodridge stating they were going to send me some convex/concave washer to fix the leaking issue others have experienced with the center SS hose from their kit 14175. Hopefully it comes soon and is a fix. We shall see! Seems like the kit needs to be updated either way…

Edit: I will post the part # of the washer if it fixes the issue etc if they supply the item number.

Thanks, I’ll be following since I have that line in my parts drawer.

 

[druiddonn]

What’s going on?

Apparently battery acid corroded one of the sockets on the pcm so more money but the battery is new and the old one wasn't leaking the shop clames no responsibility

 

[Rocket Man]

Apparently battery acid corroded one of the sockets on the pcm so more money but the battery is new and the old one wasn't leaking the shop clames no responsibility

Crap that sucks. Sorry to hear.