What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Sam Harris]

That was another consideration. We had just started into a more narrow section of trail when the snow started again. We considered driving to the next good turning point, but didn't know how far it would be. We ended up backing about 300' back down the trail to a spot just open enough for us to back up into with some momentum.

Good call

 

[Walchit]

Stripped out this POS cam bolt last night, so it's back to the grinder I guess this morning, I'm on the verge of loosing my sh#t to be honest...

 

[Walchit]

Poured some water on it as I went, hope I didn't ruin the bushing...

 

[Rocket Man]

Poured some water on it as I went, hope I didn't ruin the bushing...

It should be fine. Sorry you’re having so much trouble.

 

[Walchit]

Idk if it was the toothed part on these replacement alignment pins that sticks out into the cam, or if the antisieze I put on the Smooth part of the bolt got on the threads and I should have went less than 140 ft/lbs. Or if it is the wallered out slot that the bolt goes in, or if the bolts are just junk. I will get it figured out one of these days. I should have just took it to the alignment shop and had them strip the bolt out instead of me, lol. I just wanted it kinda close...

 

[Walchit]

Here's the hole

 

[TollKeeper]

Your fine, the cam bolt will align things when you get to that point. The little divot wont matter.

 

[blueinkd]

Stripped out this POS cam bolt last night, so it's back to the grinder I guess this morning, I'm on the verge of loosing my sh#t to be honest...

Ouch. And you bought an alignment kit correct? Something like this??

 

[Walchit]

Just bought my 3rd set of those bolts, so I have one extra for the other side. I just wanna take it to get an alignment, but I feel like it's gonna be a wild ride like this lol. I have negative camber now(I think, tilted inwards) and it looks like I picked up some toe out along the way.

 

[Rocket Man]

Just bought my 3rd set of those bolts, so I have one extra for the other side. I just wanna take it to get an alignment, but I feel like it's gonna be a wild ride like this lol. I have negative camber now(I think, tilted inwards) and it looks like I picked up some toe out along the way.

You’re gonna have negative camber right after lowering it down off jack stands until it’s driven a bit. Every vehicle does that.