What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Tonyrodz]

I know there was a thread in here about being able to put LEDs in the roof rack on a Z71.

 

[latvius]

Don't know the thread but I DL this pdf a long while ago

 

[TEXCHEVY]

I mounted the sensors, spartan work!!! ) (the kit has not yet arrived), I traveled about 100 km, at the moment no error code in diagnosis. Engine light off. The engine runs well on gasoline and also lpg

Update : 25,000 km no problem

 

[Keviebear86]

My steering seems really hard to turn but only when I'm parked. It's almost like something in binding, but it doesn't do it when I'm moving. I have all new tie rods, idler, and pitman, the ball joints are freely moving, and there is no leaks in the system that I can see. Just about to replace everything and hope for the best.

 

[tooleyondeck]

My steering seems really hard to turn but only when I'm parked. It's almost like something in binding, but it doesn't do it when I'm moving. I have all new tie rods, idler, and pitman, the ball joints are freely moving, and there is no leaks in the system that I can see. Just about to replace everything and hope for the best.

Rack & pinion or steering gear? There could be an issue inside you gear if you have one.

 

[latvius]

My steering seems really hard to turn but only when I'm parked. It's almost like something in binding, but it doesn't do it when I'm moving. I have all new tie rods, idler, and pitman, the ball joints are freely moving, and there is no leaks in the system that I can see. Just about to replace everything and hope for the best.

Did you replace the centerlink?

 

[Keviebear86]

Rack & pinion or steering gear? There could be an issue inside you gear if you have one.

its got a steering gear box (4WD) I was leaning towards that since its original and has 220k on it

Did you replace the centerlink?

I have not replaced the center link yet. It doesn't appear to have any damage or bends. Is it something I should be looking into replacing?

 

[latvius]

its got a steering gear box (4WD) I was leaning towards that since its original and has 220k on it

I have not replaced the center link yet. It doesn't appear to have any damage or bends. Is it something I should be looking into replacing?

Personally I would have replaced with the other components but I wouldn't now since you have it all back together, I was asking because it can be put in backwards unlike older vehicles which only went in one way. If it is put in backwards it can cause issues.

 

[Tonyrodz]

I need opinions--Driving home from work last night, while stopped at a light my brake pedal slowly went down lower then it should've. Driving it progressively got worse. I changed the master cylinder 2 years ago this month. Changed using an AC Delco part. Do you guys think it sound like the mc again? There's no leaks coming from anywhere, although the mc is a tad low on fluid? My question is could it be the booster instead of the mc? How to differentiate between the 2? TIA.