JesusArTorres
Full Access Member
Today I finished the rear vent caps.
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
SRTH8R
Full Access Member
De-badged the lift gate, and test fit the grille before it gets painted.
JesusArTorres
Full Access Member
SRTH8R
Full Access Member
Grille is just black plastic. I figure paint will stick to that better than sanding on the chrome factory one. Also bought a black speed grille insert, but it won't fit this grille. Got it on fleabay.
Why won't the insert fit that grill?
SRTH8R
Full Access Member
The grille opening in the aftermarket grille is larger than the stock grille. It's about a 3/4-1 inch bigger opening all the way around. Was hopping to get rid of the GMC, but I will just paint the red part black or body color.
Ahh.. Yeah my old Certifit grill on my Sierra was smaller than stock, so my punch grill barely squeezed in.
Just stretch the speed grille to make it fit if its only 1 inch. Mine is different obviously, but had to actually make mine smaller to fit, still had quite a bit of extra material.
I would try that before I sent it back. Just remember nothing is expected to fit flush and fine when modding. lol
I would try that before I sent it back. Just remember nothing is expected to fit flush and fine when modding. lol
SRTH8R
Full Access Member
There is no "streaching" it. If it was a mesh type material maybe. Plus it's powder coated. Need to find a Denali and measure the grille, might be closer to that size. Hard to see but this is held down and to the side, to much space to fill.
Similar threads
