What did you do to your NBS GMT800 Tahoe/Yukon Today?

[GMC Denali Z71]

Nice addition and perfect use of that space on the Z71 racks.

They should have come with some form of lights like that had LEDs been more popular and reliable at the time like they are now. Nice work.

Thank you!

 

[mmeachem]

The morning I spent doing some attention to detail. Re-painted calipers and then hit up the rotors(which are only 8 months old but had a nice rust color to them) The new wheels show more behind so I couldn't let that be. Seeing how I had ambition today...I then spent 4 hours detailing it including clay bar,seal,wax, and rain-x. It is pouring out so no pics til the weather breaks...but here is the wheel detail anyway...

View attachment 61037 View attachment 61038

Did you tape the rotors up or spray the whole thing and how'd you do the calipers?

 

[05Single]

Finally got 6000k fogs to match my 6000k lows and 6000k switchbacks. Lookin and feelin fresh!

 

[OHSIXX]

Did you tape the rotors up or spray the whole thing and how'd you do the calipers?

This time around I was a little lazy when it came to the calipers anyways. I just used plastic bags like from walmart to cover the rotor and sprayed the caliper(s). I didn't tape off the parts of the brake pads that show show the calipers like I did last time though. It still looks good. Maybe when I do a brake job next time I will completely remove the calipers and spray them.
As for the rotors-kinda the same thing but reversed. Cover the calipers after they are dry and spray the rotors. I did the fins and the hubs by the lugs. Don't worry about overspray on the rotor face-a few good stops and it is all gone. Just remember to hit up the rotors and calipers with brake cleaner first to remove all the dust so the paint sticks better...

@mmeachem

 

[MRS.Z-56_Hoe]

Very Nice~!

 

[mmeachem]

This time around I was a little lazy when it came to the calipers anyways. I just used plastic bags like from walmart to cover the rotor and sprayed the caliper(s). I didn't tape off the parts of the brake pads that show show the calipers like I did last time though. It still looks good. Maybe when I do a brake job next time I will completely remove the calipers and spray them.
As for the rotors-kinda the same thing but reversed. Cover the calipers after they are dry and spray the rotors. I did the fins and the hubs by the lugs. Don't worry about overspray on the rotor face-a few good stops and it is all gone. Just remember to hit up the rotors and calipers with brake cleaner first to remove all the dust so the paint sticks better...

@mmeachem

Sounds good I'll probably do this when it warms up a bit

 

[brian.roberts.1293]

Thank you! There were only 3 for my front light bar, 2 for AUX, and 1 for Stabilitrak Traction Control before the rear LEDS, but now 8 in that little space.

Can we get a link to the lights since you say they fit well.

from my Galaxy S7 Edge

 

[osiris94ej]

Laminex filmed my fogs..

 

[05Single]

Laminex filmed my fogs..

Install pics

 

[osiris94ej]

Install pics

They are already back in, i will snap some of them already put back in tomorrow.