What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
kbuskill
***CAUTION*** I do my own stunts!
Also I didn't see anything on his site for our trucks... did he custom make it for you? And how much was It?
randeez
Full Access Member
he used to stock them on the shelf....then some one came along and insulted his design by asking for it non louvered.now the rest of us are screwed
and i ripped most of the wiring out from behind the android head unit, cleaned it up, removed the harness to connect to the rear seat entertainment cause it was always on showing what was on the screen.
had some fluid all down the passenger side, inside the wheel wells all over the fender liners. thought it was brake fluid so i pulled both tires off looked over everything. determined that it was red, so i started looking at every transmission fluid line no leaks. no idea wtf it was, so i cleaned it all up and hoping for the best. i did run it through a car wash, has some surface protectant crap that was red, may have puddled up somewhere behind a panel and covered the truck after driving my best guess
and i ripped most of the wiring out from behind the android head unit, cleaned it up, removed the harness to connect to the rear seat entertainment cause it was always on showing what was on the screen.
had some fluid all down the passenger side, inside the wheel wells all over the fender liners. thought it was brake fluid so i pulled both tires off looked over everything. determined that it was red, so i started looking at every transmission fluid line no leaks. no idea wtf it was, so i cleaned it all up and hoping for the best. i did run it through a car wash, has some surface protectant crap that was red, may have puddled up somewhere behind a panel and covered the truck after driving my best guess
PG01
Supporting Member
That guy on ebay
1) Its not 1970
2) nobody see’s it because im not lifted for it to be seen
You wish
It was on ebay and i asked nicely and i don’t remember
Yup
PG01
Supporting Member
Louvers look horrible.
I thought it was a HVAC component
Sent from my SM-N910V using Tapatalk
I thought it was a HVAC component
Sent from my SM-N910V using Tapatalk
lowh07
Full Access Member
- Joined
- Dec 1, 2017
- Posts
- 325
- Reaction score
- 1,239
just sayinSent from my iPhone using Tapatalk
kbuskill
***CAUTION*** I do my own stunts!
Thanks for the link..... the only thing I would have done differently would be that I would have added more louvers... I like louvers.... what can I say.... different strokes for different folks.
I like them because it reminds me of old school hot rods.
While I think that skid plate is cool... I don't think it is $200 worth of cool... plus mine would have to be even more custom to clear my 2 remote mounted oil filter.
PG01
Supporting Member
I only did for more protection when plowing, even though its only alum it will still protect my drive belts and lower rad trans lines, etc more than that cheap *** plastic garbage. Well worth the money for me as it’s functional and as a bonus it matches the skid plates i have under there as well so when i go under my truck i can see shiny alum...only me tho, no one else..
Installed new fog housings and dual color LED bulbs on Friday. On Saturday I got P0328 so I cleaned the MAF and threw some seafoam in the 1/4 tank I had left. Code hasn't come back since I cleaned the MAF but I ordered a new knock sensor since it was $8 anyway.
