George B
¯\_(ツ)_/¯
Frost fighter 2000 epoxy.
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sam Harris
Supporting Member
Frost fighter FTW! Don’t even bother with the other garbage!
- Joined
- Dec 8, 2016
- Posts
- 3,849
- Reaction score
- 4,803
That must have been what they used on the Garden State Parkway last December before a storm. Had no idea what it was at the time as there was no snow in sight. Looked like a dust storm on there. Have no idea why they put it down a week before the storm.
Sparksalot
Supporting Member
It’ll be easy they said...
I did the cabin air filter mod to thecopcar. Getting the cover off was super easy, with the right tool.
getting the access panel cut out was a pita on the other hand.
I did the cabin air filter mod to thecopcar. Getting the cover off was super easy, with the right tool.
getting the access panel cut out was a pita on the other hand.
George B
¯\_(ツ)_/¯
No kidding! Thats good stuff! I have continuity through all the tracing across the window now. Super happy!
Tonyrodz
Resident Resident
With my luck that rear window would explode with all that heat!
Just Fishing
Can't fix stupid
George B
¯\_(ツ)_/¯
All back together and functioning. I am very pleased and impressed. There are good directions on their website too.added to my cart.
Please post your thoughts when completed.
I cleaned the area really well, scuffed it with fine scotchbrite and then the sandpaper that came in the kit.
Be careful, the tracing is very thin...
Cleaned it with acetone and masked off an area since my pad was 85% gone. Laid the epoxy on and used my heat lamp and heat gun to cure it for an hour. Took it back out and reinstalled it. Done!
