Ilikemtb999
Full Access Member
Getting an alignment done. HATE sitting around waiting. Hoping they don’t try and pull some bs about can’t get it into spec with my modest drop.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
if there is a cel light on then autostart will not workI’ve programmed new remotes with remote start capability for each of the twins. I’ve done the lock then press and hold on the start buttons. Both twins are responding by flashing the parking lights. I’m guessing there is some additional toggle that has to be flipped to get the functionality turned on. Both have the AP8 remote start capable option.
I don’t have codes on either Hoe.if there is a cel light on then autostart will not work
I’ve programmed new remotes with remote start capability for each of the twins. I’ve done the lock then press and hold on the start buttons. Both twins are responding by flashing the parking lights. I’m guessing there is some additional toggle that has to be flipped to get the functionality turned on. Both have the AP8 remote start capable option.
I don’t have codes on either Hoe.
Hmmm, I let up when it flashed. Something else to try.
Oh yay, more programming.Not sure if this helps...
http://www.ls1truck.com/forums/electrical/36976-gm-remote-start-ap8-option-how.html
You hit lock twice, right?I’ve programmed new remotes with remote start capability for each of the twins. I’ve done the lock then press and hold on the start buttons. Both twins are responding by flashing the parking lights. I’m guessing there is some additional toggle that has to be flipped to get the functionality turned on. Both have the AP8 remote start capable option.
No. I hadn’t seen anything that said twice. I’ll try it.You hit lock twice, right?
Shouldn't have to. Lock button once then hold the circle arrow for 2-4 seconds.You hit lock twice, right?