What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[bigrhino]

Does the whole row of the leds light up or just the middle? Thanks.

 

[Doubeleive]

Does the whole row of the leds light up or just the middle? Thanks.

full row

 

[bigrhino]

Thanks again.

 

[Hi-psi]

I know the consensus is that 99% of the cold air intakes are a waste of money and the best bang for the buck setup is the stock airbox with the Airaid intake tube.

Been trying to come across/score one used cheap, but recently missed out on one on FaceBook marketplace and eBay. Strongly considering for now just doing my own out of PVC like this. I'd have about $40 in parts.

 

[Doubeleive]

hehe, I can do you one better

 

[Tonyrodz]

I know the consensus is that 99% of the cold air intakes are a waste of money and the best bang for the buck setup is the stock airbox with the Airaid intake tube.

Been trying to come across/score one used cheap, but recently missed out on one on FaceBook marketplace and eBay. Strongly considering for now just doing my own out of PVC like this. I'd have about $40 in parts.

I think it'll work fine.

 

[Tonyrodz]

hehe, I can do you one better

View attachment 217087

It's all about the air flow

 

[Hi-psi]

I think it'll work fine.

That's what I'm thinking as well. Not as good as the Airaid, since it wouldn't be totally smooth on the inside, but it has to be better than the stock setup with all the noise cancelling baffles.

 

[iamdub]

I know the consensus is that 99% of the cold air intakes are a waste of money and the best bang for the buck setup is the stock airbox with the Airaid intake tube.

Been trying to come across/score one used cheap, but recently missed out on one on FaceBook marketplace and eBay. Strongly considering for now just doing my own out of PVC like this. I'd have about $40 in parts.

If I didn't already have my MIT, I'd be making that this weekend and would rock it with pride. I'd sand off the excess molding and embossed lettering and use matte or satin black and a black fuel-rated hose for the vent tube, though.

 

[lowh07]

I had some more time to work on the console today. Really pleased with how the bottle fits. It’s sitting on the brackets in these photos...not touching the top or back panel. Still going to use dowels and glue it together and take a router to all edges. I’ll clean up the hole for the tray and a few other areas. Also picked up some nice vinyl.