I noticed after I changed the cable it starts a LOT better now, I haven't driven it anywhere yet to see if the rvc kicks back on but I can sure tell a difference starting
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Malik112099
Member
- Joined
- May 4, 2017
- Posts
- 81
- Reaction score
- 136
Replaced both rear air shocks and the compressor on my 07 XL. Worked perfectly as soon as I started the truck with no errors on the dash. I’m going to buy a lottery ticket.
Malik112099
Member
- Joined
- May 4, 2017
- Posts
- 81
- Reaction score
- 136
More pics
The_Burban
Full Access Member
- Joined
- Mar 19, 2018
- Posts
- 287
- Reaction score
- 193
Fixed my light bar. Installed XB fogs. Installed blacked out grill. The bowtie may stay off; it was painted satin black and is drying.
New plugs and wires (OEM).
New plugs and wires (OEM).
Nice but what’s with the passenger headlight?
Def need to reinstall the bow tie, as long as it’s black it will blend in and look better than the holes as if something is missing.
Hi-psi
Full Access Member
Replaced the starter today. Vehicle has never not started, but a handfull of times would do weird things like stay engaged for a second after starting, etc.
Took the approach of removing the passenger side fender liner and going in from the side over the top of the frame rail. Super easy.
Also picked up a lightly used McGaughy's 2/3 drop locally for a steal today. Probably get that on sometime in the next few weeks.
Took the approach of removing the passenger side fender liner and going in from the side over the top of the frame rail. Super easy.
Also picked up a lightly used McGaughy's 2/3 drop locally for a steal today. Probably get that on sometime in the next few weeks.
We will require pics when you do the drop...
swathdiver
Full Access Member
The adapter fits really tight and requires a good tug to separate it. Already busted the rivet holding the locking tab on the cable to the Candi module too. I sanded it some but obviously need to spend more time on it.
PG01
Supporting Member
Long day yesterday, but both hubs done and tires rotated....
