What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[wjburken]

I just got a P0741 code- TCC stuck off.

not going into lockup. Is this something that flipping the TCC valve around can fix? I know thats a trick with 4L60e trans.

edit: may have just lost the trans. Shit

View attachment 262312

Sonofa! Hope you didn’t lose it.

 

[89Suburban]

edit: may have just lost the trans. Shit

View attachment 262312

NOOOOOOo!!!!!!!!!!!!!!

 

[Rocket Man]

I just got a P0741 code- TCC stuck off.

not going into lockup. Is this something that flipping the TCC valve around can fix? I know thats a trick with 4L60e trans.

edit: may have just lost the trans. Shit

View attachment 262312

Dammit.

 

[Rocket Man]

eBay. No you have to dismantle the airbag. It’s easy peezy. The packaging is FTB. Rattling inside the box loose. It is covered in plastic you need to peel off and one thin layer of tissue paper.

https://www.ebay.com/itm/163656384137

I didn’t dismantle my airbag, just pried the old one off, cut the legs off a tiny bit, and used a blob of RTV in the center. Just line up the legs into the slots and gently push it down until it squishes into the RTV. I also bought a black vinyl sticker so the bow tie isn’t gold anymore. It didn’t go with my Esky cluster.

 

[08z71bgm]

View attachment 262325
I didn’t dismantle my airbag, just pried the old one off, cut the legs off a tiny bit, and used a blob of RTV in the center. Just line up the legs into the slots and gently push it down until it squishes into the RTV. I also bought a black vinyl sticker so the bow tie isn’t gold anymore. It didn’t go with my Esky cluster.

More than one way to skin el gato.


It really was easy peezy. 4 10mm nuts once it’s removed and it all comes apart easily. I pinched it back over the same way it was put on from the factory.


I will be getting the black sticker too. It does look a lot better.

 

[Doubeleive]

eBay. No you have to dismantle the airbag. It’s easy peezy. The packaging is FTB. Rattling inside the box loose. It is covered in plastic you need to peel off and one thin layer of tissue paper.

https://www.ebay.com/itm/163656384137

looks like they finally came up with a GMC one as well, ordered one for mine

 

[Sam Harris]

Sonofa! Hope you didn’t lose it.

X2! **** that!

 

[Rocket Man]

More than one way to skin el gato.


It really was easy peezy. 4 10mm nuts once it’s removed and it all comes apart easily.

Other than disconnecting the battery and pulling the airbag that is, which I didn’t care to do. I was done in 5 minutes. Now THATS easy peezy.

 

[R3cord303]

Step dad and I borrowed a trailer and towed it with his f150 to the mechanic. Going to drop pan and change fluid, filter, and pan tomorrow. If it works it works, if not, $3K on a factory reman.

 

[iamdub]

View attachment 262310 View attachment 262311


Swapped out the airbag emblem. So worth it.

Now black out that bowtie! lol


https://www.ebay.com/itm/Steering-W...041542&hash=item25f71bcb6f:g:iSQAAOSwB3BaDf2E


*EDIT*

Nevermind. I didn't realize I was a page behind.