What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[CaptainAmerica1]

Davenport, IA.
View attachment 360983View attachment 360985
Regular is 10%
UNL88 is 15%
Premium is 0%

E85 ~60% per my sensor
= $2.68
Premium 93 = $3.88
Here in Arlington TX lol

 

[RooTBeeRthe1st]

E85 ~60% per my sensor
= $2.68
Premium 93 = $3.88
Here in Arlington TX lol

I haven't checked my percentage in a while.
Not sure what the abv is lol
The physical sensor is ridiculously more accurate and quick though...10/10 would do again.

Edit
Last fill up is almost 75% during the Harsh SoCal winter. Lol

 

[iamdub]

Probably going to be what appears to be a brass onion -- er, union -- with a lot of barbs. Not sure if that little gray tool is to disconnect the quick connect or help install the union.

View attachment 360885

First pic I've seen of the whole shebang. I'm not even gonna begin to guess what that gray thing does. Unless it is split and opens to fit over the tubing, I don't see how it could be a release tool.

Oh well, Pawpaw is covered one way or another with his orders.

 

[iamdub]

First of the parts arrived.




View attachment 360976View attachment 360977

@Fless called it! Double male barbed coupler and a release tool. For the tool, I've never had one of these let me down: https://www.amazon.com/ARES-70024-3-16-Inch-Scissor-Disconnect/dp/B0195XBPPQ

Although, you won't be needing it to install your repair parts.

If it weren't for ethanol, I'd pick the double barbed fitting over the compression union, unless that double barb is stainless. If it is zinc-coated steel as it appears to be, you did good ordering those plastic compression unions. If they ever leak, get stainless double barbs.

 

[RooTBeeRthe1st]

7444 bulbs
The turn signal definitely let the smoke out.
The DRL uses the same, but white. Because SSV, I swapped the white drl's into the turn signal spot for now.
See if I can find any leds i like i suppose.

 

[Kee Fuller]

Got her in July 2018 with about 85k on it. Just hit it 100k

 

[RooTBeeRthe1st]

Finally modified the dust covers on the headlights to clear the leds.
Even with all the rain we've had, they never fogged being open.
After the car wash they did though.
Made sure not to offroad until I closed them up too.


Also adjusted the hood stops, hoping that's been my "front end clunk".
Some how this morning, I magically missed that bump during my commute that always makes the noise.
So I'll have to try again tomorrow morning I suppose.

 

[MajorJakkov]

Fuel prices around here are up over 50% from 1 year ago

 

[Rocket Man]

7444 bulbs
The turn signal definitely let the smoke out.
The DRL uses the same, but white. Because SSV, I swapped the white drl's into the turn signal spot for now.
See if I can find any leds i like i suppose.

Aren’t those your new AlphaRex headlights? Seems fishy that a bulb would already burn out.

 

[StrkAliteN]

Fuel prices around here are up over 50% from 1 year ago

Yea it's painful to fill up a large gas tank these days for sure.

I have a little shit box '08 Camry with a 4 cyl that I use for any trip that will be over 20 miles round trip. It helps a little.