pwtr02ss
Full Access Member
I have a slight grinding noise when turning, on the avalanche. In the summer its not as noticeable but with the temps cooling, it made me notice it the other day.
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
George B
¯\_(ツ)_/¯
I get that in the envoy. My 03 did it too. I always figured it was dust or debris behind the steering wheel by the clock spring.
Sparksalot
Supporting Member
Gone camping. Deployed the crime scene awnings on both thecopcar and theteardrop.
Just a follow up on this, I spoke to John at QA1 and the 5262 panhard bar has been discontinued.
BUT, they still have a few left at QA1. So if you still want to get one order through Eastwoods as they are still accepting orders. Eastwood orders directly from QA1. All the other vendors I tried wouldn't process the order.
Bummer hope mine never wears out
DurrtyBurB
Member
Back to the forum with a 08 Denali. Replaced the worn interior door handle, rear door lock actuator(too weak to unlock) and front passenger seat track. Previous owner had added front Escalade seats from 2010+. These were tripping the air bag light. Ended up just swapping the covers/foam on to the original frames.
Attachments
ya they changed the airbag sensor at some point, another member had this same issue I think he ended up changing the harness connector to resolve it, not entirely sure haven't head from him in a while.
Used some lithium grease and eliminated a annoying brake pedal squeak 
Did a little fall maintenance on all 3 just cleaned the throttle body's, maf's and cleaned a couple cai dry filters, engine bays are next I use some purple power and car wash wand and then a little spit n shine
That's a little better 
