What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[gooffeyguy]

Just noticed that the clear coat on the black "GMC" lettering on the front grill is peeling....

View attachment 385788

It's not an OEM emblem. Its an aftermarket one I bought off ebay and installed back in July of 2020. You'd think it'd last more than 2 years though, especially for $50

 

[RooTBeeRthe1st]

After some searching through the forum the general consensus of a factory height measurements are 35" front and 37" rear so I am pretty spot on for the 2" drop with the front strut flip to under the arm with the grade 9 hardware and the $150 ebay rear drop springs/shock brackets.

Curious what mine's actually sitting at now then.

 

[iamdub]

Here are the after measurements on the flat warehouse floor at work tonight. Anybody have any stock readings to compare to?

L/R: 35 3/16"
R/R: 35 5/16"
L/F: 33 1/16"
R/F: 33 1/8"





L/R:

View attachment 385759




R/R:

View attachment 385761

L/F:

View attachment 385760

R/F:

View attachment 385758

Nice left-to-right evenness!

 

[tungsten]

My 2500 sits 36.25" F 38.25" rear.Stock tires.

 

[RooTBeeRthe1st]

Front Driver's Side


Considering it's not supposed to be a lift kit, with the slightly larger tires and everything actually is quite a bit taller than stock I suppose.


Rear Driver's Side

 

[gooffeyguy]

Had my alignment done this morning. They said that I got everything really close when I replaced the upper/lower control arms and inner/outer tie rods.

 

[89Suburban]

Had my alignment done this morning. They said that I got everything really close when I replaced the upper/lower control arms and inner/outer tie rods.

View attachment 385855

Awesome dude! You were damn close!! Interesting numbers there. I am going to save this to my alignment thread for future reference. How does she feel?

 

[gooffeyguy]

Awesome dude! You were damn close!! Interesting numbers there. I am going to save this to my alignment thread for future reference. How does she feel?

Feels fine. They told me to bring it back in 6 months to have it rechecked.

Now to get my new tires mounted/balanced to the new wheels. Probably next week

 

[justchecking]

Fixed a rattle I had since the accident. Pushed and pulled on everything from the rear doors back. Turned out it was the rear crossbar on the roof rack. I moved it one slot forward and that fixed it.

 

[RooTBeeRthe1st]

Fixed a rattle I had since the accident. Pushed and pulled on everything from the rear doors back. Turned out it was the rear crossbar on the roof rack. I moved it one slot forward and that fixed it.

About as easy as it gets!