What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,703
Reaction score
47,424
Location
Central Jersey
View attachment 395446
My friend and I took some things too big for trash man to the dump. 99 times out of 100 I can back up a trailer like nobody’s business. But this time I almost backed into someone and had to try three times. Must have been the smell affecting me!
Should've had your buddy there guide you in.
 

TollKeeper

Full Access Member
Joined
Feb 21, 2010
Posts
3,061
Reaction score
6,117
Location
Brighton, CO
Interesting, but I don't think we have any Marathon stations around Denver, so I'm wondering what refinery would supply either the gas or E85 product.

The only gas refinery in Colorado (Suncor - https://www.suncor.com/en-ca/what-we-do/refining/commerce-city-refinery) is just now starting to supply gas again after being shut down for about 3 months. Not sure if they produce E85, but maybe @TollKeeper would know.
Im pretty sure its either going to be Nustar, Sinclair, Magellon, or SunCor. My company supplies almost all the E100 product to them, and they dilute it to the E85.

I have a limited access to E100. But nothing I own is even remotely capable of E85.
 

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,106
Reaction score
2,534
Crawled under there and torqued all the bolts on the diff cover before I dropped 300 bucks on a fancy cover.
Glad I did, all of them turned quite a bit to get to 25 foot pounds (I know 30 is the spec, just seems excessive. Pretty sure I only hand tightened them last time I was in there changing the felpro gasket that split and leaked out for the lube locker gasket.

Unfortunately, noticed that opinion seal is also leaking... That's a lot more of a pain in the butt job. So we're just going to pretend we didn't see that for a while.
Now wondering if the Cadillac this axle came out of was in a front end collision or something, maybe pushed the drive shaft into the diff. Because when I checked the backlash when I got it, it was tighter than factory spec should have been and it's supposedly had between 50k and 100k miles IIRC, and now leaky seal after maybe 15k mi.
 

Attachments

  • IMG_20230327_190616622.jpg
    IMG_20230327_190616622.jpg
    223.2 KB · Views: 4

Mickey_7106

Full Access Member
Joined
Oct 22, 2018
Posts
479
Reaction score
314
Location
Bay Area
Also, years ago I remember someone doing a write up for modifying the stock airbox and inner fender to allow more air to flow through? Does that sound familiar?
20230327_123234.jpg
 

89Suburban

Bull in the china shop
Supporting Member
Joined
Jan 10, 2013
Posts
15,328
Reaction score
42,701
Location
SE PA
Good morning, does anyone know if there are replacement grommets for the under side of the stock air filter box?
View attachment 395561

Yes I just ordered some recently for mine:




Also, years ago I remember someone doing a write up for modifying the stock airbox and inner fender to allow more air to flow through? Does that sound familiar?
View attachment 395562


I made a homemade seal out of this stuff:

 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,747
Reaction score
26,633
Location
Treasure Coast, Florida
Also, years ago I remember someone doing a write up for modifying the stock airbox and inner fender to allow more air to flow through? Does that sound familiar?
View attachment 395562
The grommets reside in that plate that is missing them. $13 or so for a new one. Someone just posted this the other day.
 

Forum statistics

Threads
132,714
Posts
1,873,072
Members
97,537
Latest member
CHENTE

Latest posts

Top