What did you do to your OBS GMT400 Tahoe/Yukon Today?

[RynoHarris]

I was going to take pics in prep to do a write up. But since I only had the weekend to get this done (and it being my 1st retro) I put the camera down and put my nose to the grind. Here it is Tuesday and everything is in and wired..i learned having friends over hanging out while trying to focus on a project doesn't do me well. I now have to either unseal the plastic lenses, or reverse the mounts on the back of the housing. Sounds easy but the mounts have a Phillips screw (that's for the pivot point) that is a mother ***** to get to. When I got the lights mounted back and realized what I've done. It was late so I figured I'd steal the wifes car one more time. So after our trip this evening to take the kids to see Santa, I'll be fixing that issue and should be good to go. I will do a write up but I just didn't take a bunch of pics. Sorry guys.

p.s. look SICK btw.

Pics would've been nice but just a write up in general is awesome lol.

Sent from my HTC One X

 

[evil_e]

I took a few pics. But as far as a write I can get will be able to get pretty detailed. Cause there were a few things that I had to figure out the hard way. For example at first I was trimming to fit the projector in through the front but was about a 1/4" away from allowing the lense to clear. Then I realized that I should be trimming for the projector to fit from the back side of the housing, and the shroud through the front. Could have saved time on that note alone.

 

[_Dylan_]

I took a few pics. But as far as a write I can get will be able to get pretty detailed. Cause there were a few things that I had to figure out the hard way. For example at first I was trimming to fit the projector in through the front but was about a 1/4" away from allowing the lense to clear. Then I realized that I should be trimming for the projector to fit from the back side of the housing, and the shroud through the front. Could have saved time on that note alone.

What projectors did you use?

 

[Gzes]

Hauled a scrap ranger with my dove tail and 2dr. Hauled it no problem

 

[Y2KpewterZ]

Detailed both my rigs.

 

[rolfsent]

Test fitted my GMC 20's. Need some opinions.

 

[Gzes]

Hauled a Mitsubishi to the scales yesterday and today taking a del sol to the crusher aswell. Damn it's car horror

 

[Chevrolado]

Test fitted my GMC 20's. Need some opinions.

Sweet! They look great on there. I really dig it.

 

[BigDaddy13440]

Test fitted my GMC 20's. Need some opinions.

Looks fantastic!


I've got 20's on mine as well. Running 275/55/20 Pirelli Scorpion ATR's at the moment (32"), will be stepping up to 275/65/20's (34.2") the next set I need.

What are the specs on those rims? I've got 20x8.5's, stock backspacing, but I'm running 1 1/2" spacers on the front, and 2 1/2" spacers on the rear, the tires stick out about 1-1 1/4" past the fender flares.

LOVE the stance with the spacers!

 

[SunlitComet]

Retrofit write up is in order....

What retrofit?

---------- Post added at 05:06 PM ---------- Previous post was at 05:04 PM ----------

bought hoses for the hydro-boost changeover.