What did you do to your OBS GMT400 Tahoe/Yukon Today?

[bigal11419]

They fit perfectly went in a hell of a lot easier than removing the old manifold.

How did the Flowtech shortys fit?

---------- Post added at 08:33 PM ---------- Previous post was at 07:01 PM ----------

The leafs, u-bolts and saddles came in, waiting on the 2" drop shackles and keys

 

[God]

Had a hot date and when I turned on the yukon she said she loved the sound of my truck, so I showed her my straight pipe

 

[qukon 95]

Took the NBS master cylinder off and put original back on, the wife don't have strong legs like she use to.

 

[rmodel65]

put a turn signal bulb and two parking light bulbs in the hoe

 

[Y2KpewterZ]

Took it on a legitimate off road adventure up to Shoe Creek/Crab Tree Falls. Definitely found the weak spots in the truck and what it is and isn't capable of. Wasn't too bad even on the 20s lol

 

[noJeepshere]

Love to see these things on the trail B)

cent frum a smaert fone

 

[bigal11419]

Hunted down a power steering fluid leak, added a ram mount to the cab for my phone, changed over more of the interior lights to LEDs, converted the high and low beams to 50W LEDs, finally did the 4-High mod.

 

[domer94]

fluids ... fluids

as is the custom with a new-to -me ride.. did the fluids.
on the new 99 burb , i dropped the front diff fluid (old stuff was like mud. nasty) , engine oil , and transfer case with new autotrak blue ( pretty bad too). on the 96 2 dr , did the front diff with lucas heavy duty 80w-90 , nd tranfer case with mobil1 atf. just waiting on rear end gaskets , and will do both rears. nice and fresh for winter in north jersey.

 

[strad]

Removed the transmission pan and replaced the filter. Used the inch pound torque wrench my father in law gave me for the first time to put the pan bolts back on. There was some metal on the magnet. I would say about the same amount as there was the last time I had the pan off, which was 40k miles ago. Not too much. Transmission works fine.

 

[95escahoe]

Finishing up on painting the frame/wheel wells/drums