What is this box and why is the top wet with gas?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Mean_Green

Mean_Green

Full Access Member
Joined
Mar 23, 2023
Posts
436
Reaction score
554
Parts cannon loaded.

Evap canister, Valve assembly and purge solenoid for $150 or so. Should be here next week.

May not need it all, but figured I'd go ahead and get it thinking it will solve my code and CEL issue. Stuff is likely original.

Why do they only sell the valve assembly WITH the metal bracket that holds it and the canister? The bracket is fine and I can't see why it would ever need to be replaced. Adds cost and requires a bigger box to ship in.


Lines are all OK as far as I can see. It's only the plastic nipple molded as part of the canister that broke off.
 

NardDog

Full Access Member
Joined
Mar 26, 2017
Posts
113
Reaction score
102
Parts cannon loaded.

Evap canister, Valve assembly and purge solenoid for $150 or so. Should be here next week.

May not need it all, but figured I'd go ahead and get it thinking it will solve my code and CEL issue. Stuff is likely original.

Why do they only sell the valve assembly WITH the metal bracket that holds it and the canister? The bracket is fine and I can't see why it would ever need to be replaced. Adds cost and requires a bigger box to ship in.


Lines are all OK as far as I can see. It's only the plastic nipple molded as part of the canister that broke off.
I did this exact thing about 4 years ago just last month got a leaking evap code, not a bad run.
 
Last edited:

RET423

Full Access Member
Joined
Dec 4, 2017
Posts
150
Reaction score
173
If the EVAP cannister is saturated with gas the purge solenoid is not purging when your driving, it's supposed to trap the evaporating gas fumes when the vehicle is off; then use engine vacuum when the vehicle is running to draw those trapped fumes into the intake to burn them

It is possible the broken nipple is allowing the fumes to escape before going into the cannister, causing the appearance of raw fuel & the smell; but that should throw an EVAP code for a large or small leak as the vacuum will be too low within the EVAP system
 

Forum statistics

Threads
134,021
Posts
1,895,269
Members
99,472
Latest member
koldrag
Top