Why don't we have a sticky with part# for our front ends?

[xanatost]

Well it's time for me to do the dreaded front end work. She got over 260,000 miles and being a 4x4 that has done off road duty and never had anything changed I can't complain. So looking on here at past posts and all the work that has been done on our hoes why don't we have a sticky with part numbers on here?? Would save me a bunch of time. Just asking

 

[ezdaar]

Front hub assembly left, Part #1.
Front hub assembly right, Part #2.
Lower ball joint x2, Part #3
Upper Ball joint x2, Part #4
Inner tie rod end x2, Part #5
Outter tie rod end, Part #6
Idler arm, Part #7
Pitman arm, Prt #8
Idler arm bracket/bushing assembly, prt #9


Might have missed something and may need to cross reference those part numbers with GM.

 

[Jerky Arm Ape]

Front hub assembly left, Part #1.
Front hub assembly right, Part #2.
Lower ball joint x2, Part #3
Upper Ball joint x2, Part #4
Inner tie rod end x2, Part #5
Outter tie rod end, Part #6
Idler arm, Part #7
Pitman arm, Prt #8



Might have missed something and may need to cross reference those part numbers with GM.

Lol.
Idler arm bracket/bushing assembly, prt #9

 

[Phone Man]

Try going to Rockauto.com. They will have all the GM part numbers as well as other brands and cross references.

 

[laredo1307]

Go to ACDelco.com and you can find all the P/N's on truck through their search engine. Then go to amazon and rockauto and find the cheapest prices. That's how I rebuilt my whole front end for around $800.

Here's a list of everything I replaced in this thread.

http://www.tahoeyukonforum.com/forum/showthread.php?t=62162

 

[Johnny Racer]

^^^^^^^^^^^^^^ Nice post. Did my front end rebuild about 2 years ago. Made a huge difference.

 

[livingez_123]

Sticky? why? we can't do everything for you.

 

[OR VietVet]

Have you ever tried to shake that thing off when you get a sticky on yourself? PITA! You grab it with your hand and it sticks, you grab it with the other hand it sticks. Sheeeesh!

Rock Auto for all your part needs. You can cross reference part #'s right and left there.