Window Wash Tank Protection or Move to Another Location?

[Tozan]

4 inch lift running 35's if you look close you can see my washer tank still in the stock location after thousands of miles off road.

 

[gmartin1215]

4 inch lift running 35's if you look close you can see my washer tank still in the stock location after thousands of miles off road.


View attachment 379733

Thanks @Tozan
That's good to know!
Your bumper conceals the wash tank more than mine so I may still do something later if I see it taking abuse.
Hey, what wheels are those you are running?
Also, what didn't you like about the fender flares?

 

[Fubar0715]

Try this thread. https://www.tahoeyukonforum.com/threads/building-the-ss-v-trailhoe.124192/

My SSV has this setup however, a replacement bumper was installed, so I have a factory look.

 

[Tozan]

Thanks @Tozan
That's good to know!
Your bumper conceals the wash tank more than mine so I may still do something later if I see it taking abuse.
Hey, what wheels are those you are running?
Also, what didn't you like about the fender flares?

The flares do not fit very tight and they start flopping around and the door flares are not very secure. One of them fell off when I was off road I was lucky it was on a trail I had to come back on so I found it on the way out. I also had to cut them to fit the bumpers...

 

[gmartin1215]

The flares do not fit very tight and they start flopping around and the door flares are not very secure. One of them fell off when I was off road I was lucky it was on a trail I had to come back on so I found it on the way out. I also had to cut them to fit the bumpers...

Thanks. I am wondering if double-sided tape might remedy some of that problem with them flopping and falling off?
I got a set of Bushwackers for my rig, but been on the fence about taking them back because of problems people have mentioned in some posts I have read.
I was thinking of double-sided tape can help secure it. Frankly, that should have been something Bushwacker should have provided, IMO.

 

[Tozan]

I live in Arizona and double sided tape would most likely stop sticking in a week or two... I was tempted to drill out the fake Bushwacker bolts and install real ones through the fender wells.

 

[gmartin1215]

I recently built a high clearance front bumper and removed the washer reservoir. I've got a secondary battery set up in my rig so I'm planning on fabing up an aluminum reservoir on the right side infront of the radiator/ next to the headlight area. If I remember the dimensions right I was planning on getting a 4" piece of round tubing 12" long and welding on a additional rectangle piece off to the left of it where the sensor and pumps will be mounted.

@Swanbird11
did you ever build this?

 

[gmartin1215]

I am still considering relocating/replacing my window wash tank. I have seen options for an aluminum wash tank, but the ones I found only have a single pump and no level sensor. I suppose I could modify one to have dual pumps and a sensor, but I would like to see if there are other options. I do want to keep the space open for a second battery.
I like @Swanbird11 idea. Did you ever build that?
Another option I read is where someone used a wash tank from a 96, but did not see any details on that idea.
Any other ideas?

 

[tungsten]

A piece of aluminum covering the front and bottom would be the easiest and would still look good.

 

[gmartin1215]

A piece of aluminum covering the front and bottom would be the easiest and would still look good.

I thought about that, and the idea is not off the table yet, but moving it to someplace else is my first choice