Crippin87
Full Access Member
- Joined
- Mar 2, 2017
- Posts
- 198
- Reaction score
- 147
I’m looking for a set of norcals custom springs for the NBS body. Thanks!
WTB NorcalSS NBS Springs
- Thread starter Crippin87
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
ivin74
05 NBS Nali
I heard the spring rate of the norcals are similar to the OEM envoy and trailblazer springs. Several folks are running those springs. You also get a drop with them.
OP
OP
Crippin87
Full Access Member
- Joined
- Mar 2, 2017
- Posts
- 198
- Reaction score
- 147
I have the 4” drop trailblazer springs from DJM in now. He claims his springs will get you lower than anyone else’s.
ivin74
05 NBS Nali
How low are you trying to get? What size wheels and tires are you running?
OP
OP
Crippin87
Full Access Member
- Joined
- Mar 2, 2017
- Posts
- 198
- Reaction score
- 147
Right now I’m at 32.5” up front and 32.75” in the rear. I’m thinking I should be able to run 24s but if it’s too close I can do 22s. I plan to roll the front fenders and match the rear drop with keys in the front. Right now I only have the spindles in the front. I was going to try out the -3 lower control arms from DJM but I haven’t heard anything good about them. I also worry those might make it have a rake in the front which I don’t want either so I figure I will just use keys.
