Yes!! Another Noob with Offset Question

[BigUnLuke]

97 4 DR 4x4. 6" rough Country ordered. Want to put 35 12.50 20s on 20x9s. What offset, backspacing do I need. Would like a little further stuck out than stock. One shop in town says +0 with 5.5 BS the other says +18 with 5.5. Please help. I have already searched and looked and not getting anywhere.

 

[HortonHiresAHoe]

I'm running 35x12.50's on 20x9's @ 4.5" backspacing

 

[BigUnLuke]

I'm running 35x12.50's on 20x9's @ 4.5" backspacing

Offset? What's it look like stance wise?

 

[bowtiefreak]

I run a 17x8 with 4.5" BS on the blue one and a 17x9 with 4.5" BS on the red one

 

[BigUnLuke]

OK, both look good to me. Neutral offset? Positive? Negative?

Sent from my DROID RAZR using Tapatalk

 

[bowtiefreak]

not sure the offset, been too long

 

[BigUnLuke]

Having a hard time finding a 4.5 wheel in a 20x9. Not that it matters without knowing the offset needed.

Sent from my DROID RAZR using Tapatalk

 

[bowtiefreak]

looked it up. -12mm offset on the 17x9 on the red truck
0mm offset on teh blue truck with 17x8

 

[BigUnLuke]

OK thanks. So if my readings are correct that would essentially be a 5 bs. So a 5.5 needs a +12 to be about the same as yours. I'm still not sure about that but I'm thinking so.

Sent from my DROID RAZR using Tapatalk

---------- Post added at 09:50 AM ---------- Previous post was at 09:48 AM ----------

I don't mind them being in too far.... nothing a set of spacers can't fix. But too far out is gonna look stupid.

Sent from my DROID RAZR using Tapatalk

 

[HortonHiresAHoe]

Offset? What's it look like stance wise?

I think they are 5" backspacing w/ -12mm offset



BTW Kris, I love your Hoe!! It was an inspiration when I was contemplating lifting mine.