yukondoit12
TYF Newbie
- Joined
- Dec 2, 2012
- Posts
- 5
- Reaction score
- 0
want to put chrome upper grill on. cant get old grill off. does anybody know how to remove the front bumper.
yukon xl 2012 front bumper removal
- Thread starter yukondoit12
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
vt_hokie2008
Full Access Member
I imagine it to be like my '07 Tahoe, if so, here's how to do it:
Take the two screws and 2 clips out of the fender liner, these are the ones on the outside of it that attach it to the bumper
Take the bolt out of the corner of the bumper behind where you just removed the fender liner top screw. It's close to the headlight.
Remove the 4 screws on the bottom of the bumper. This is below the fog light area.
Repeat the above on the other side.
Take the bolts out of the top, two for the bumper, 4 on the grille.
Pull the bumper off, first get the corners loose, then work it off in the center. Takes about 10-15 mins.
Take the two screws and 2 clips out of the fender liner, these are the ones on the outside of it that attach it to the bumper
Take the bolt out of the corner of the bumper behind where you just removed the fender liner top screw. It's close to the headlight.
Remove the 4 screws on the bottom of the bumper. This is below the fog light area.
Repeat the above on the other side.
Take the bolts out of the top, two for the bumper, 4 on the grille.
Pull the bumper off, first get the corners loose, then work it off in the center. Takes about 10-15 mins.
