Z-71 coils in rear of Denali XL

[01Konvict]

Definitely stock shocks and springs. The shocks are most likely blown so that's causing the sag. I can't see the ride height sensor in that one pic. Try putting the camera inside fender past tire. It mounts to that upper trailing arm and frame.

 

[dirtydenali07]

UPDATE: installed the z71 rear coils Monday afternoon. Pics and measurements to follow.

 

[delightskinned1]

Id be glad to see the before and after pics! as im having an issue with my 07 denali after I put in a front level by RC I have what seems like a cali lean (rear Squat) ... i do have the air ride suspension and have not been able to find many answers on bring the rear up slightly like 1-2 inches

 

[dirtydenali07]

Id be glad to see the before and after pics! as im having an issue with my 07 denali after I put in a front level by RC I have what seems like a cali lean (rear Squat) ... i do have the air ride suspension and have not been able to find many answers on bring the rear up slightly like 1-2 inches

IIRC you can adjust the height sensor arms to trick the leveling system into thinking it’s too low; the compressor would put more pressure to shocks and raise it up. Not sure how high you can safely do this. As for the pics, I didn’t realize until reading your post that I hadn’t taken any yet. I can tell you that the rear is 1 1/2”-2” higher than front. Looks good. I might even add 1/2” or 3/4” spacers to front. (I’d put a lift on an Amish buggy, given the chance)

 

[delightskinned1]

Thanks for the update!, ordered a set of spacers but I wanna look into the Height sensor thing too didn't realize that was something that could be done.