-
-
mikez71 reacted to rdezs's post in the thread Service stable track and traction control issue with
Wow.
My wife's 2014 Escalade, new front hubs and sensors couple months ago, new rear axle bearings and sensors also. The last 20 feet of the... -
mikez71 reacted to DesertfoxAZ's post in the thread So, I did a thing…….and Hello…..My PPV project. with Wow.
Haha….got the work order. Engine was replaced with a manufactured engine at 96k miles. So this engine has 39k miles on it.
-
mikez71 reacted to DesertfoxAZ's post in the thread So, I did a thing…….and Hello…..My PPV project. with Wow.
Was messing around with wiring a bit at lunch and spotted this under the hood.
-
mikez71 reacted to Doubeleive's post in the thread Tahoe drivers door panel compatibility with Like.
handle design changed in 2010+, they all fit but the older ones are a different design, 2007 on the left, 2010 on the right
-
mikez71 reacted to Doubeleive's post in the thread Tahoe drivers door panel compatibility with Like.
YES, 2010-2014 WILL WORK, THE 07-09 had a different handle design they will all fit, but the older ones are different looking
-
@lspann3525 I just looped the seatbelt through the bottom rung of the steering wheel, that part wasn't a big deal
-
mikez71 replied to the thread AC troubleshooting Help.You're right! Maybe the wire from ECM to relay interrupted somewhere...
-
-
That's what I thought until I saw an old thread saying they didn't have those sensors until something like 2010 or 2012. I did not see a...
-
mikez71 reacted to RooTBeeRthe1st's post in the thread What did you do to your NNBS GMT900 Tahoe/Yukon Today? with Like.
Ordered a fan shroud off of eBay since I cut mine to fit the old Cold Case radiator, wanted one unmolested to fit the new Cold Case...
-
mikez71 reacted to Scrappycrow's post in the thread Aluminum / XFE NNBS Front Suspension Rebuild with Like.
Does that bump/pad interfere with the dust shield? I know it's too late for your situation, but the bump/pad can be machined off, the...
-
mikez71 reacted to petethepug's post in the thread Aluminum / XFE NNBS Front Suspension Rebuild with Love.
The springs had identical part numbers but they didn’t xRef anything on the interwebs. The part number (25940740) on the old strut...
-
mikez71 replied to the thread Hard Starting at Temperature, P0175.Check your ethanol %. Even though you only use regular gas, the ethanol is calculated off the O2 sensor readings.. Maybe try cleaning...
-
I had the vapor vent valve fail on a 08 GMC Acadia caused the no-start when warmed up issue. I had to do the "clear flood" method to...
-
mikez71 reacted to Charlie207's post in the thread rattling vibration noise near driver engine bay at acceleration with Like.
The H3 mounts should be the same, dimension-wise as the Tahoe/Yukon/truck mounts. You might need to whack the primary, Roadkill-style.
-
That's an inspection cover, soaked with a fluid leak. I'm actually surprised how dry that crossmember below it is compared to everything...
-
-
Loading…
-
Loading…
