2
2006Tahoe2WD
Latest activity Postings About
-
-
22006Tahoe2WD replied to the thread Engine oil pressure issue.IMHO - the oil pressure seems low. However, you list new pickup tube (I assume new O-ring as well), oil pump, oil pressure sender...
-
22006Tahoe2WD reacted to DodDel5-3-6L80e's post in the thread Lifter tick when cold? Berryman B12? with
Like.
Your lifter is ticking until oil gets to it. This has to be fixed quickly to prevent damage to your enginee. Your valley plate has... -
22006Tahoe2WD replied to the thread Lifter tick when cold? Berryman B12?.I found a broken bolt front drivers side. Put one of those brackets on and all seems fine after an additional 30k? miles. When I was...
-
22006Tahoe2WD reacted to cfmistry's post in the thread Lifter tick when cold? Berryman B12? with Like.
If the bolts are broken below the manifold (which the usually are), you don't have to touch them. If they are sticking out a big past...
-
22006Tahoe2WD replied to the thread No oil pressure at start up, 2001 Tahoe.On another thread I explained the result after getting the O-ring changed. Oil pressure fixed. I guess I should have posted here but I...
-
22006Tahoe2WD replied to the thread 07 denali oil pan gasket,pickup o-ring.I didn't know about this tube with the two bolt flange. If this works for another 18 years I think I'll be okay.
-
22006Tahoe2WD replied to the thread 07 denali oil pan gasket,pickup o-ring.Maybe not the best but the tube is supported at two other points.
-
22006Tahoe2WD replied to the thread 07 denali oil pan gasket,pickup o-ring.Yes, It could be the order in which the oil tube bolts are installed. If you do the bolt near the O-ring first you might be less...
-
22006Tahoe2WD replied to the thread 07 denali oil pan gasket,pickup o-ring.The pickup tube O-ring is definitely an issue. There are countless YouTube videos and forum posts that mention this. I bet I've...
-
22006Tahoe2WD replied to the thread 07 denali oil pan gasket,pickup o-ring.The old O-ring bends fairly easily but I haven't bent it vary far. I don't want to break it now. When pushing in on it, it seems hard...
-
22006Tahoe2WD replied to the thread 07 denali oil pan gasket,pickup o-ring.Major Success - O-ring Replaced I'm so pleased that I almost started a new thread. I had the O-ring replaced and my oil pressure went...
-
-
22006Tahoe2WD reacted to j91z28d1's post in the thread DOT Secretary Rolls Back All Emission Standards with Like.
I'll wait to see how it plays out. usually an old guy being a talking head into social media isn't the most trustworthy thing. they will...
-
22006Tahoe2WD replied to the thread Y'all's Thoughts on Torquing Bolts Correctly, Please.I'm not saying that. I'm saying if e.g. you torque your wheels to 140 ft-lbs (2006 Tahoe) using the proper technique. If you go back...
-
22006Tahoe2WD replied to the thread Y'all's Thoughts on Torquing Bolts Correctly, Please.Auto things: pulling two things together e.g. wheel and hub and head bolts. These are considered "flat" items being pulled together...
-
22006Tahoe2WD replied to the thread Y'all's Thoughts on Torquing Bolts Correctly, Please.Assuming the initial torque of 65 was done properly (continuously moving until click) then additional applications with that wrench set...
-
-
Loading…
-
Loading…
Forum statistics
Latest posts
-
What is the quarts "range" on the dipstick on these trucks?- Latest: Vladimir2306
-
-
-
-