HopheadFury
TYF Newbie
- Joined
- Aug 7, 2024
- Posts
- 12
- Reaction score
- 10
What size did you go with? Stock suspension I’m guessing? Looks great!
What did you do to your 21+ T1XX today?
- Thread starter soulsea
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
munch520
TYF Newbie
- Joined
- Dec 7, 2018
- Posts
- 7
- Reaction score
- 5
Oil change for the wife's ride and washed them both 
Two weeks ago ... installed GMC performance exhaust.
Last week ... installed Range DFM disabler (RA007).
Pretty happy with both. Exhaust doesn't center on the cutout in the rear, and stealership can't do anything. So I am going to take it by an exhaust shop tomorrow to see if they can adjust. Pretty annoyed by that.
Last week ... installed Range DFM disabler (RA007).
Pretty happy with both. Exhaust doesn't center on the cutout in the rear, and stealership can't do anything. So I am going to take it by an exhaust shop tomorrow to see if they can adjust. Pretty annoyed by that.
KMeloney
Full Access Member
- Joined
- May 2, 2009
- Posts
- 2,780
- Reaction score
- 268
Can you share some more about the DFM Disabler? I didn't realize they were available for our trucks.
Also, do you know if it conflicts with the Autostop Eliminator? I've got that installed already.
It's pretty straight forward to install. It sits between the ECM and the connector -- that's located inside the driver's side wheel well. It disables the autostop as well, so you'd likely just use this device and get rid of the other one.
There's a discussion on this forum: https://www.tahoeyukonforum.com/threads/dfm-disabler-released.150279/
And here's the device: https://www.rangetechnology.com/products/dfm_module/parts/RA007
I’ve got the auto stop eliminator and also recently installed the DFM disabler. No conflicts between the two. Both products are in-line devices so no software modifications with either.
66 Galaxie
Full Access Member
- Joined
- Sep 1, 2022
- Posts
- 192
- Reaction score
- 161
Installed a black grill from eBay. Good fit and finish similar to factory grill on RST and comes ready for front camera. Easy swap and huge improvement over the stock High Country grill. Next up is blacking out the silver lower bumper trim front & rear and then decide on some black rims.
Note that to swap your grill you will need to take off the bumper to remove the old grill and install the new one.
Note that to swap your grill you will need to take off the bumper to remove the old grill and install the new one.
Similar threads
