Peeledpeas
Member
- Joined
- Oct 22, 2023
- Posts
- 32
- Reaction score
- 31
Ok, so my original question was, do I need to bolt in an outer CV joint end or not, and it appears that the answer is yes. So, I will do that.
CV axles
- Thread starter Peeledpeas
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
YES
You can dismantle the removed shaft to get just that part to install. Don’t hack job cut it like mentioned earlier. There is a video how to take them apart. I will try to find it for you.
@915_Tahoe May be able to look up a part number just for the stub shaft if you choose not to disassemble
Trey Hardy
8” fabtech icon coilovers uniballs 24x14on35/15.50
I just took the cut off wheel to mine before I had kryptonite bearings lmao
I know son I appreciate you haha
asand
Full Access Member
- Joined
- Aug 9, 2018
- Posts
- 154
- Reaction score
- 172
If its awd you cant drive with a missing shaft. If its 4wd you can put a dummy joint in to hold the bearings together.
Peeledpeas
Member
- Joined
- Oct 22, 2023
- Posts
- 32
- Reaction score
- 31
I have a spare axle and I know how to remove the joint.
