CV axles

[Peeledpeas]

Ok, so my original question was, do I need to bolt in an outer CV joint end or not, and it appears that the answer is yes. So, I will do that.

 

[89Suburban]

Ok, so my original question was, do I need to bolt in an outer CV joint end or not, and it appears that the answer is yes. So, I will do that.

YES

 

[89Suburban]

You can dismantle the removed shaft to get just that part to install. Don’t hack job cut it like mentioned earlier. There is a video how to take them apart. I will try to find it for you.

 

[89Suburban]

 

[89Suburban]

@915_Tahoe May be able to look up a part number just for the stub shaft if you choose not to disassemble

 

[Trey Hardy]

You can dismantle the removed shaft to get just that part to install. Don’t hack job cut it like mentioned earlier. There is a video how to take them apart. I will try to find it for you.

I just took the cut off wheel to mine before I had kryptonite bearings lmao

 

[89Suburban]

I just took the cut off wheel to mine before I had kryptonite bearings lmao

I know son I appreciate you haha

 

[asand]

If its awd you cant drive with a missing shaft. If its 4wd you can put a dummy joint in to hold the bearings together.