4 Piston Big Brake Upgrade from 2019-20

tc8510 said:

Thank you!

Click to expand...

Right now you can get new gm take off front brake calipers on ebay for $250-$300 for the pair.

Anyone buy their calipers off of Rockauto, send your factory ones back as the core, and get refunded the core charge? They say the core has to fit the same vehicle that the new part comes from, which technically it would, but it's not right for a 2019+.

buckwild27 said:

Have you looked into the 6 piston police tahoe caliper upgrade? I like the brake upgrades I did on my 14 sierra. I'm going to do the 6 piston calipers on the front of my 18 sierra with the camaro 4 piston calipers on the rear. Here's the rear of my 14 View attachment 438426

Click to expand...

I pulled the trigger for my 2018 Yukon Denali. Ordered : front 16" rotors with 6 piston Brembo + Camaro 4 piston Brembos for the rear. Total cost for all parts needed was less than $2,000.

MrMonte said:

I pulled the trigger for my 2018 Yukon Denali. Ordered : front 16" rotors with 6 piston Brembo + Camaro 4 piston Brembos for the rear. Total cost for all parts needed was less than $2,000.

Click to expand...

Take lots of pictures and post them when you swap it over.

buckwild27 said:

Take lots of pictures and post them when you swap it over.

Click to expand...

Parts are arriving in a few days. I will make a new post with pics & part numbers. Everything in new except the rear calipers which I paid $150 for the pair & were included in the total cost.

I repainted the calipers on my Wife's 2014 SS Sedan so the Yukon's calipers will be the same color.

Just got back from a 2K mile roadtrip and had many boxes to open. These 16" rotors & 6 piston calipers are massive and heavy.

What is the biggest you should go in the rear, in terms of rotors?

MrMonte said:

Just got back from a 2K mile roadtrip and had many boxes to open. These 16" rotors & 6 piston calipers are massive and heavy.
View attachment 441297

Click to expand...

Did you get these installed yet? Also, what calipers are those?

S33k3r said:

Did you get these installed yet? Also, what calipers are those?

Click to expand...

Not installed yet, just got back from a 1,500 road trip & flying out to Florida in 2 weeks so may not install until summer. I want to get my 73 Camaro restro-mod build done by end of May.

The front brakes are the PPV Tahoe 16" rotors with 6 piston Brembo calipers. Part #s 84793057 & 84793058. The rear 4 piston Brembo calipers are from a Gen6 Camaro.

Here's the current state of my 73 Camaro that sat in a cow field 20 years before I got it. Suspension, brakes, 6.2L LS3 & TR6060 6 speed manual are in. No wiring, plumbing, fuel system, interior or glass installed yet. Gen5 ZL1 seats & center console are going in.

Thanks! Also, why a 6.2? Aren't they having hella problems with the 6.2s? Honest question, I don't have an opinion one way or another.