OP
OP
OK, Bought a 07 with a couple problems today.
- Thread starter SpareParts
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
SpareParts
Full Access Member
Yes everything is from Rock Auto and GM, ACDelco, Felpro. You get the idea.
Nothing from ChingChong China. I only use name brand, where they get it from i can't control.
When my engine was out for the cam job, I installed a 1 foot grease gun hose for the oil pressure sensor. Got fittings off ebay. Now the sensor lies up close to the purge valve alongside the intake manifold. No problems changing that baby now ! The mechanic extended the wiring for it. Grease gun hose rated for 5000 psi or somethng like that. Working good.
OP
OP
SpareParts
Full Access Member
That would sure work. Im installing a new one with the wrecking yard engine.
I also do not believe the old one is bad.
I also do not believe the old one is bad.
mikeyss
Full Access Member
I have tried to find where I got the info on the 5364 heads being problematic, but I couldn't find it anywhere. Therefore, I guess it looks like I'm wrong.
OP
OP
SpareParts
Full Access Member
It's cool. More info on these trucks helps everyone
OP
OP
SpareParts
Full Access Member
Thanks to this bearing, i will never have to work about the 8 seals under the valley cover.
OP
OP
SpareParts
Full Access Member
Also found a great parts cleaner. Gets old varnish and gunk off pretty good. I tossed the parts in a bucket and let them soak for a couple of hours and rinsed them clean. No scrubbing.
