Sorry so late to reply. I used a Curtiss #31088 which bolted right up. The only modification was I had to cut the splash guard underneath. Hope this helps.
Tow Hooks or Front Hitch
- Thread starter RoadTrip
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
tagexpcom
Full Access Member
- Joined
- Aug 12, 2023
- Posts
- 178
- Reaction score
- 147
Yes, the one I got was the same Curt Front Mount #31088. And it looked to me like the bolt holes were there but the auto-shop that installed it was sooooo jumpy about it (not sure why) from beginning to end of the project. They insisted on spot weld rather than use bolts / said they didn't see how bolts would work.
And they refused to modify the splash guard - so I did it myself. Was really easy as the splash guard is in 2 pieces that unscrew from each other. Mounted the back piece near engine and then easy to cut the front 1/2 and bolt it between the engine section and the bumper.
What year / model is yours?
