Oil pressure sensor HELP!!!! - SOLVED

Spencer4991 · Mar 20, 2025

Does this look to have a filter in it??? I have fished a hook in but can’t seem to grab anything and the new filter(not putting it in) doesn’t fit all the way down…. 2010 Chevy suburban

Spencer4991 · Mar 20, 2025

Thanks for all the input!!!

j91z28d1 · Mar 20, 2025

were you able to get one out? I can't tell in that pic at all

Fless · Mar 20, 2025

I can't tell if there's a screen in there or not. Some people take a long deck screw or the like and stick it down there, turn it clockwise by hand and pull them out. YMMV

petethepug · Mar 20, 2025

Spencer4991 · Mar 20, 2025

I wasn’t able to get anything out….ill try a deck screw tomorrow, I’m dropping the pan anyways to change out the pick up tube gasket. I’m trying to cross everything off before replacing the pump.

Fless · Mar 21, 2025

Looks like a larger screw might work better. 5/16" lag maybe...

Joseph Garcia · Mar 21, 2025

Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

You are already receiving sage advice from the knowledgeable folks on this Forum.

Not all of these motors had filter screens. @Doubeleive may be able to clarify which ones did not have a filter screen.

Doubeleive · Mar 21, 2025

2010 should have one and it looks like there might be one in there but not 100% sure. A pick tool should get it out

rdezs · Mar 21, 2025

I'm thinking that most likely looks like one. Should lift right out with like an o-ring pick tool

Oil pressure sensor HELP!!!! - SOLVED

Spencer4991

TYF Newbie

Spencer4991

TYF Newbie

j91z28d1

Full Access Member

Fless

petethepug

Michael

Spencer4991

TYF Newbie

Fless

Joseph Garcia

Doubeleive

Wes

rdezs

Full Access Member

Similar threads

Forum statistics

Latest posts