Search results

  1. Bigmac18

    Wheel Spacer sizing

    with a 20x9 +24 wheel and 1.75" spacers, yours will stick approx 1/4" further out than mine pictured.
  2. Bigmac18

    Wheel Spacer sizing

    It will push your wheel out about 44mm from where it is now, so depending on the offset of your stock wheels (+31mm?) you're probably close to a -12 offset wheel I am running a 2" spacer with stock wheels (20x8.5 +31) and 305s just for some comparison:
  3. Bigmac18

    Wheel Spacer sizing

    Yup... 1.75" Bora spacers were made specifically for the GM stud length
  4. Bigmac18

    Lifted / Leveled 2013 Build Thread

    I've also been playing with the idea of wrapping the lower part of the front bumper in gloss black, somewhat like the older Z71s Thoughts?
  5. Bigmac18

    Lifted / Leveled 2013 Build Thread

    I actually had to replace the front bumper as well, I installed it without the valance at first, and I just didn't care for the look, it looked unfinished, so i put it back on. Maybe trimming it is a good compromise?
  6. Bigmac18

    Lifted / Leveled 2013 Build Thread

    UPDATE! Did some long awaited updates to the build. Up front, I installed Bilstein 5100 lift struts on the 1.3" setting with 2" upper strut spacers and Freedom Offroad lift upper control arms. In the Rear, I added bilstein 5100 shocks and updated the exhaust tips to the SLP resonator delete...
  7. Bigmac18

    Lifted / Leveled 2013 Build Thread

    Got Some Updates....More pics to follow, but here are a few teasers:
  8. Bigmac18

    plastidip steering wheel emblem

    Looks Great! I am the same way with the gold bowties, used some black vinyl and covered all my emblems. Steering wheel, and even the wheel center caps. But mine were smooth (2013) the vinyl probably won't work on the newer textured emblems.
  9. Bigmac18

    WTB - Polished 20" Wheel

    Need 1 replacement OEm 20" Polished (not chrome) wheel off of a 2013 Tahoe LT. Same as pictured. Anyone have a takeoff they no longer need? Thanks
  10. Bigmac18

    Exhaust Tip For 5.3L Tahoe?

    305/55r20 Cooper Zeon LTZ - Perform great!
  11. Bigmac18

    What have you done with your other vehicles?

    My Previous Ride... was only stock for a few weeks before the lift and 35's, then for a change, I lowered it to a sport truck stance. I made countless other small mods along the way. Interior and exterior.
  12. Bigmac18

    Exhaust Tip For 5.3L Tahoe?

    You Would just need a clamp like this one:
  13. Bigmac18

    Exhaust Tip For 5.3L Tahoe?

    I have some dual tips straight out the back I could sell...I took them off about 2 weeks ago. It has the pipe and exhaust hanger on it, you'd just need to cut off the factory resonator and clamp it on...just like the SLP tip, but straight out the back I can get a picture of the tips this evening
  14. Bigmac18

    RockAuto.com Discount Code for Parts & More - Expires November 12, 2018

    Picked up a tie rod end from you guys, fast shipping, quality part!...THANKS!
  15. Bigmac18

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    they are like night and day from the stock shock! especially since the rear passenger shock was shot. Not too stiff, but much more control with these. Now I need to get the fronts installed
  16. Bigmac18

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Finally installed Bilstein 5100s in the rear. Those upper bolts are a pain to get to!
  17. Bigmac18

    3" Level lift w/ 33x12.5r20 or 285/55r20?

    I have an ebay 2 1/2" Upper Strut spacer and a 1/2" lower strut spacer in the front. (I wasn't sure if I wanted all 3" or stick with 2 1/2, so i wanted some flexibility) And I have an ebay 2" rear spring spacer with shock extenders. I am going to install the 5100's on the 2nd notch with the 2...
  18. Bigmac18

    3" Level lift w/ 33x12.5r20 or 285/55r20?

    3" level up front, 2" in rear, 305/55r20 with 2" wheel spacers on stock wheels no rubbing (with lots of trimming) I have the new upper control arms and Bilstein 5100s already, just need time to install and align.
  19. Bigmac18

    Resonator Delete without SLP or other tips

    I had a shop weld this up after cutting off the resonator, a dual polished stainless tip straight out the back, added a magnaflow 12589 while they were under there as well. http://www.tahoeyukonforum.com/media/lifted-2.25376/full?d=1447185680
  20. Bigmac18

    Pop after leveling kit

    I've had some here and there, I thought it might be the ball joints, as mine are maxed out. Or possibly the endlinks when turning?
  21. Bigmac18

    LED headlights w/ fan behind dustcover?

    I replaced the LEDs that I was having problems with with Silverstar ZXE bulbs. They are much whiter and brighter than the stock headlights. Nothing Like HID or LED, but a nice crisp light output. It was a compromise I was happy with at the moment...
  22. Bigmac18

    LED headlights w/ fan behind dustcover?

    I had something similar and they looked amazing. The issue I had was really bad radio interference when they were on. I couldn't listen to any radio stations. Not sure if it was because they were cheap chinese ones off of ebay or what? but I sold them. Any interference with those posted above?
  23. Bigmac18

    DIY level kit

    Check out Youtube. Any of the videos on the Silverado Level kit installs will be similar to your install.
  24. Bigmac18

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Put a fresh batch of 5w30 full synthetic in it.
  25. Bigmac18

    If I set my Bilstein B8 5100 Series Shocks to max set can I mount Nitto Terras Grappler 315/50R24

    I just got the new upper control arms and full set of 5100s in this weekend! Now I have to find time to install them! I will post up results

Forum statistics

Threads
131,999
Posts
1,860,669
Members
96,399
Latest member
Gm_guy

Latest posts

Top