Search results

  1. 9

    Arm Rest Removal?

    As you are looking at the front of the seat you can pull the material back where the armrest connects. When you pull it back enough you'll see a clip and maybe a rubber band in there. Pull it out with some needle nose pliers, and the armrest will slide right out. Put the clip back in, and you...
  2. 9

    Would it fit??

    The CVR will not fit. If you like the CVR sound you can get the CVT. It's pretty much the same sub except it's shallow mount. Most of those under seat boxes are for 2 8's, 10's, or 12's. You have several options for the sub. P3's as mentioned above, CVT's as I mentioned, and MTX makes a good...
  3. 9

    subs behind the rear 1/4 panels

    The 10w6's probably aren't going to sound as good as they did in the other vehicle. Of course I don't know the vehicle. I'm assuming it was something rear firing with appropriate airspace.
  4. 9

    Oil Pressure Gauge issue

    Could be the oil sending unit. Although it wasn't my problem when mine did something similar, and that was the suggestion I got. I changed the oil and put a heavier weight oil in it and it was fine. If you are scared about it I'd get a pressure reading. It could be the oil pump
  5. 9

    Z71 Wheels

    Just let me know
  6. 9

    Z71 Wheels

    Wheels only? I'd be interested. PM a price shipped to 29073
  7. 9

    dual battery help

    The new wheels look great. I think they are new, it's the first time I've seen them I think.
  8. 9

    Down firing subs under rear seats in OBS

    I know. I didn't want to start a new thread on it
  9. 9

    Down firing subs under rear seats in OBS

    I think I may try one of these in the 12" version. There seem to be a lot of options now for a shallow mount that works in low space. Although I think the general consensus is shallow mounts don't drop low. I think CVT call for 1.0 cu and the box is .7, so polyfill and pray. I have a few other...
  10. 9

    Have most of you had to use spacers

    on the rear doors. I'm scared to get spacers cause I want to be able to put he speaker cover back on. I need an additional 1/4". I squeezed them in my old Yukon but they didn't fully seal.
  11. 9

    Dash cracks?

    Yeah that makes sense now that I look at it. I sold my 96 last week, and picked up a 97 over the weekend.
  12. 9

    Dash cracks?

    Anyone have this problem? I have a big crack in the middle left to right. I was trying to find a molded plastic dashcover, but I couldn't find one for a 1997. Coverlay MFG makes them but for the 95-96 only. I guess I could put an ugly carpet one up there.
  13. 9

    Wheel Question??

    Did you put these on? Anyone have a pic of these on an OBS. Trying to decide between these or the 16" Silverado wheels
  14. 9

    Are oil sending units a problem in the Vortecs

    I have a 96 that I'm just kind of messing with. It's been a nightmare. The intake gaskets went first. Now if I drive to the gas station or like a 10 minute or so trip the oil gauge drops to zero when stopped. When I cruised back home the gage was fine, but when I parked it dropped again. It...
  15. 9

    Oil pressure...

    Anyone
  16. 9

    Oil pressure...

    Is the oil pressure switch and the oil sending unit two separate parts?
  17. 9

    2 door tahoe/blazer/yukon if you got one show it off

    I'm surprised I've never seen you riding around town. Sharp truck
  18. 9

    Roof rack crossbar pads

    Anyone know where you buy something like that. I saw one on an Expedition today. I googled it, but couldn't find anything.
  19. 9

    New Distributor and now P1345 Code?

    I believe he's offering to help if you were close.
  20. 9

    Mounting Depth on rear speakers

    Does anyone read this section? ---------- Post added at 04:18 PM ---------- Previous post was at 02:38 PM ---------- Nevermind. If any one needs to know it won't work. The power window motor has mount in that area. I got the speakers to fit though
  21. 9

    How to recharge your AC

    Sweet truck
  22. 9

    Remove bucket inside pass arm rest

    I just pulled the leather back where the armrest goes into the seat. You'll see the clip. Use some needle nose and pull out the clip. If you plan on putting the armrest back in at any time put the clip back where it was and when you slide the armrest back in itll lock in. That's how it was on...
  23. 9

    Mounting Depth on rear speakers

    As most of you already know the mounting depth on the back speaker isn't that. I need about a 1/4" more. I know there is metal plate back there. Is it possible to use a hole saw and cut a hole in that plate. I don't think the magnet on my speakers would passed the plate, but that extra space...
  24. 9

    plastic door panel screws.. where can i get them?

    I tried Oreilly's, Autozone, Advance Auto, Napa, Home Depot, and I stopped in an Body Shop and nobody had my clips.
  25. 9

    Got the rear speaker wire colors but

    Left side (-) tan (+) white Right side (-) red (+) tan The tan is faded cause it looks white, I even followed it back as far as I could see and both look off white. Is it safe to assume as I'm looking at the factory plug on each side. If the red wire is the left wire on the factory plug then...

Forum statistics

Threads
132,087
Posts
1,862,132
Members
96,552
Latest member
charles454

Latest posts

Top