You did not state if you had an alarm or not...
Not sure if you can do this with just the factory key fob remote. Maybe, just maybe, someone has figured out how to do that.
For me ...you would be better served by stepping up to a new alarm. I'm 100% sure you can do what you want, roll up and...
That's a loaded question capable of lighting forums on fire my friend., akin to;
what wheels should I get?
what color should I paint my ride?
I firmly believe the system is only as good as the quality of the installation!
Someone will chime in and answer with specific brands. Just bear with me...
Speaking from experience...I had BCM go bad with non of the issues you have listed.
I don't like throwing money at problems as I'm sure your the same. I would suggest you continue with search in the forum to ensure that is actually the issue.
If it really is the BCM here is my experience, FYI...
Keep it topped off at the correct level and see if it really is going down or you are in fact you are still "burping" the system
Run it and cycle through the the front and rear heater settings on next drive.
Before starting it cold check it
When you get to your destination check it
if your...
I second what Denali2k8 said
AMSOIL
Assuming nothing is suspect, like metal in oils when you drain 'em....
Change these fluids once and "ferget'bout it"
The members suggesting the ground issue is consistent with the symptoms listed under 1, 2 & 3. Ground wire contact cleaning and sealing or even quality Big three (or more) wire replacement are a much cheaper fix than a BCM. Those are not cheap!
Speaking from experience...I had BCM go bad with...
First, not to state the obvious but...Look up your state laws
caveat-Stay away from red and blue as reserved for law enforcement There was a comment recommending LEDs from medicop he is correct
As far as a set up that's really up to you ...and the law but code3 and Whelen websites and...
Old original post but what the heck,
Go to Napa Auto Parts
Delphi fuel pump
PN FG0273 and DFG0273 on box
and
Also purchase a fuel filter
Napa Gold PN 3481
(My Yukon XL 1500 is an '03 with a 5.3 non-flex fuel so those are the parts needed)
A tranny jack and a regular 2-ton jack
Some basic tools...
"just curious why do you want yer trailer running off a second battery are you running some sort of refrigeration"
I was wondering the same thing!
My best friend wants to put in a some accessories in the trailer to run independent or w/o generator (noise) he's an avid kayak fishermen
And his...
I too have been having the DIC display rear left door ajar and my alarm doing same thing you describe I had been manually locking to remain a good neighbor (but recently got broken into.. Rotten luck whilst alarm not functioning)
In my case I am certain that the BCM is out;
I checked the...
Still wondering why the PCM 20 amp fuse blew
I don't have a schematic so I can only speculate;
Circuit overload from cranking?
Or
Overloaded from combination of cranking and the radar detector and wife's I pad plugged into 12v plugs
Oh and stereo on (Pandora through IPad to system)
Ok so today diagnosis ;
I was able to get to crank yukon by Jumping starter with key in ignition
So WTF
The BCM recognized the Keys
So back to the simple things;
Popped under hood fuse cover
relay for starter checks out
Started checking fuses
Found the 20 amp PCM fuse blown
Replaced and was...
Thanks Doug
I really did need to lighten up and laugh!
sitting here having a triple shot and scratching my head
Definitely need to get one of these OBDII blue tooth scanner
Didn't know that they existed
Please LMK brand and if you care to share price expected to shell out
Greatly appreciated...
So I started to diagnose starting with alarm.
Why you ask?
This was the most recent change to vehicle.
All connections soldered to UNCUT factory wire (only stripped enough plastic sheath to wrap/twist wire and solder the connection and wrap/tape/shrink wrap even zip tied over for redundant...
First of introductions I'm Carlos
I've lurked and learned a lot since we got an 03 Yukon XL
Lots of knowledge to be shared here and I appreciate the community
Now I am hopping someone can chime in here for some cyber diagnostics;
Taday driving home from work cruising around 75mph engine...
Well it just happened to our 03 !
He got in just like Edzaar described
Tossed about the contents of the console and glove box
Opened back took (150 piece) tool set, a lunch box size air compressor, oh and about $5 in quarters
Not after car but rather a quick sale item (probably a junkie...
Git 'er done
My Yukon has a bench seat
I removed it last summer to do an OCD carpet cleaning
Likely the bolt holes are in same locations for your buckets
FYI there is a stud or two welded to floor (seat hold down) you can use can use bolt your "box" down to my buddy jacked up his knee of...
We all have seen how the seat cushion breaks down. That side bolster is crushed almost every time we get in or out. This loosens the cover, hide or fabric. The loose cover will just aggravate the situation with the backside of the cover causing friction wearing the foam even more. Then you have...
Thanks for the reply Shawn !
That install is on the Sierra is what I had in mind.
Yep I have a DSP unit.
I have a couple of three way sets MB Quarts, and NOS JBL's (yes the old school 4" titanium dome mid range) and a set from morel but I may save this one for another car.
Regardless of which...
I have been lurking in this forum for a while and recently joined so this is my first post so please excuse any newbie cliches. I have done a search on this but with less than satisfactory results, even after reading many archived posts.
So here's the deal I have a variety of components in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.