Could be but am unsure. I was promised, when I got out in December of 1975, that in the future, my medical and prescriptions were covered. Lie lie lie....
I have even went in to the VA when I did not have an appointment, because of a medical problem or needed to just ask a question of a nurse...
When I called the landlord over to see what I found, the caps, I saw him take his hand and act like he had a bottle in it and held it like he would be opening a bottle cap, against the back of hood edge.
Today was blower motor replacement for my landlord on his 2018 Suburban LT. Removed the p/s under dash cover for the blower motor and HVAC box. Way easier to remove than to replace it. The carpet gets in the way of the p/s firewall location of the 1 or 4 retaining screws. 7mm heads. Removed kick...
https://portland.craigslist.org/clc/cto/d/clackamas-2001-gmc-yukon-xl-1500-sport/7792006609.html
Trouble is, when you run the VIN, on the title he sent me a pic of, it says year is 2000 and when I ran the VIN, it says is an SLE instead of the advertised SLT.
He said his dad owned it and then...
Like @Fless and I said, start with why there is zero compression. You are running at the worst case scenario when you should walk to proper diagnostics.
You had the key off and out of ignition, or even in it, and it still makes the noise? Yea, like @Doubeleive said, something is still powered up and making that noise. I think it is an actuator, too.
Not the rust belt in this area but I have no idea where it spent it's whole life. Did not even have surface rust in that area. Had about 160k miles and do not know if the calipers brackets had ever been off. I would assume, at that mileage, that pads had at least been done before.
Removed and replaced both of the inner door handles on the 98 Sidekick today. Easy as all get out. Took about 12 minutes to do both. Still gonna charge 1/2 hour. P/S release handle was broken and the driver's side handle return spring was broken/gone. The d/s one had been replaced before with a...
You have two choices. Either get rid of it and lick your wounds or have a qualified tech/shop diagnose the actual problem. I would want to know WHY it has "0" compression in cylinder #7. Also, sounds like the problem came about after driving for a few miles. The truck may well have needed struts...
Yea, like @B-train said, helps to know what you are working on. You are in the 2021+ years section. If your truck is that new, why are you replacing struts and if not that new, should have posted this in a different section.
Welcome to the forum from Oregon.
I see you did replace the fuel filter but the existing fuel in the tank could be contaminated due to crud build up and clogged again. Yes, check the fuel pressure with cold engine, KOEO and then shut off and see if pressure bleeds off right away and then watch...
Welcome to the forum from Oregon.
Sorry about the problem with your truck.
Miles on the engine? Random misfire code for 1 or 2 cylinders are are/is for cylinder 1 or 3 or both? Oil in cylinder can foul the plugs. Were the same plugs reused when "cleaned out" and restarted? How was the oil...
Thanks to @915_Tahoe, I got the turn signal flasher/module figured and ordered from RA. My problem with it actually happened 2 times yesterday. Anyway, I parked in the end of my driveway and removed the dash cluster surround trim and under the steering column. I could look at the end of the old...
I was recently looking for a Silverado, 2000-2006. I want to see a page of 2000 to 2006 Silverado's. On FB Marketplace, there is so many sub divisions, I was having to look thru 6 different sections. Eff that.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.