I lived this. Original trans died at 60,000 miles. Rebuilt by GM under partial good will warrantee as it had routine maintenance by dealer. At 130,000 miles had the trans flushed. Thought I was doing a good thing. 150,000 miles trans failed again......
My 04's owners manual is very ambiguous about this, saying it may show a reading or just throw a warning light when low. I've only seen the warning light. For you guys that are getting the readings in the DIC, how does it come up?
Thanks
I'd replace the belt tensioners also. I'm at 157,000 miles. Pump was already replaced but belts and hoses are original. So I'm replacing those along with the tensioners. Better to do it at your connivence then along the side of the road.....
Red, I went from a 2004 Tahoe (NBS) stock brake to a 2008 Tahoe (NNBS) stock brake. Calipers were direct bolt on, no additional brackets needed. Obviously new rotors also. Worth the upgrade especially if you need new brakes like I did. I have to think your Denali would be the same. Everything...
I was kind of saying it in jest, but I do need a couple of just the rubber tabs. I can not find them separately but don't need the whole holder. It would be better off going to someone who needed the whole holder. If no one needs it I'll be glad to buy it though. It's great your doing this. It's...
You'll need to drive it more for the temperature to get warmer. Mine reads about the same on my 7min drive to work. On the highway it reads about 150-160 without a load.
How much lower do you want to go?
I and several others here have the Belltech 2/3 kit that we are very happy with.
Check out the Street Suspension thread here for all the information and pictures you'll need.
Here's my question for you guys. 2004 Tahoe, I have never seen actual tire pressure on the DIC but have seen the low pressure warning. Replaced wheels (new to me 20's) and bought new AC Delco sensors of Amazon. Went to STS (tire store) to get an alignment and replace sensors. They stated they do...
OSSIXX, I have about the same mileage on mine now and agree, very happy with the look and ride. My install also went pretty well with the exception of one 10mm rear sway bar bolt. Soaked it for days, would not come out nor could I break the head off. Had to cut the head off then drill it out...
Thanks fiatdale.......I was looking to keep as much ride quality as I could so I didn't want to go any bigger.
Batman, I have the Belltech 2/3 kit. Only have about 20 miles on it so it's still settling. Sharp eye on the LEDS.....
Here's mine, just finished yesterday. Just at about 34 rear, 33 front. The 20's are new to me...hope this helps. I plan on doing some towing so I also have the 60742 Airlift air bags.
I have a 2004 Tahoe 5.3 that I have just put the efan conversion on. OEM harness. The question I have is how are the fans suppose to operate. I know pin 33 is wired into the A/C pressure circuit and pin 42 is temperature activated. I believe the passenger side fan comes on when called for by the...
OHSIXX, I really like the ride. Along with the 2/3 kit I rebuilt the front end as the truck had 157,000 miles on it. The 20" wheels are new to me.
BADRIDES; Rear sits right at 34" and the front at 33", both +or- 1/4".
Fosscore was very influential in get me started on this project...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.