Search results

  1. THarber

    SOLD - Brembo big brake kit

  2. THarber

    SOLD - Brembo big brake kit

  3. THarber

    SOLD - Brembo big brake kit

    GM Brembo biug brake kit. 6 piston calipers with 16" rotors. Rotors #604-47086 Dynamic Friction Calipers #84793057 and 58 Pad pins #85153957@2 and Brake Shields #84763236 and 35 AcDelco Pads #84997498 Banjo bolts I painted and cleared calipers, not professional but I used caliper paint as...
  4. THarber

    2021 Tahoe PPV massive oem brakes, 16"

    This set up will give you 6 piston Brembo calipers and 16" disk brakes for the front of your truck. This was purchased for my 2019 Yukon but might fit others. They would not clear my wheel so my loss is your gain. To the best of my knowledge you will need a 28mm offset wheel or greater for this...
  5. THarber

    Changed thermostat, Coolant temperature stays at 185 degrees

    Did you change the settings in the ECM to make fans come on sooner? If not, it will always run the same temp.
  6. THarber

    Battery type and replacement in a 2019

    I just put a new AGM in my 2019 and a new starter about 6 months ago. I do not remember what it came with from the factory.
  7. THarber

    2021 Tahoe PPV massive oem brakes, 16"

    Yes spacers would work but I'm really funny about all of that. Spacer here, shim there and before you know it, its no longer safe or dependable. I ordered a Power Stop kit yesterday so plans are to go that route next weekend. I might just keep these on the shelf for another day but if someone...
  8. THarber

    2021 Tahoe PPV massive oem brakes, 16"

    This is a bust for me. I'm going back top the stock assembly. I don't have time to work on this. This set up will be for sale for what I have in it.
  9. THarber

    2021 Tahoe PPV massive oem brakes, 16"

    Stock 22's do not clear. You will also need to get 10x1 banjo bolts. Factory is a course thread, my calipers are fine.
  10. THarber

    Tweak front ride height

    Can you lower the front end just by shortening the leveling rods or will it just make the ride softer? I'd like to drop mine 1/2" while I'm doing the big brake kit.
  11. THarber

    2021 Tahoe PPV massive oem brakes, 16"

    I painted the calipers with VHT caliper paint and clear. I also painted the backing plates black, not pictured but they were not coated so I didn't want them to rust. Backing plates are a bolt on, no modifications at all.
  12. THarber

    2021 Tahoe PPV massive oem brakes, 16"

  13. THarber

    2021 Tahoe PPV massive oem brakes, 16"

  14. THarber

    2021 Tahoe PPV massive oem brakes, 16"

  15. THarber

    2021 Tahoe PPV massive oem brakes, 16"

    I'm in the middle of it and yes it will need a washer. I have to get cleaned up and off the the parts store.
  16. THarber

    2021 Tahoe PPV massive oem brakes, 16"

    That's good info but I already paid for the AC Delco ones, wish I would have kept looking for the cheaper pads. I think I paid about $350 for my pads. I hope to install all of this today.
  17. THarber

    2021 Tahoe PPV massive oem brakes, 16"

    DYNAMIC FRICTION 60447086 (604-47086)
  18. THarber

    2021 Tahoe PPV massive oem brakes, 16"

  19. THarber

    2021 Tahoe PPV massive oem brakes, 16"

  20. THarber

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    8 qts Royal Purple Oil and new Baldwin filter and added a Fumoto drain valve. I hope to get to my big brake kit end of the week.
  21. THarber

    Which Knock sensor is P0327?

    Make sure nothing is loose on the engine block, ie engine mounts, exhaust, etc. The sensors pick up basically sounds, so any type of vibration might set them off. If you are not hearing any spark knock, use your HP tuners to decease the sensitivity of the sensors, or temporarily turn them off...
  22. THarber

    2019 yukon 5.3 collapsed lifer. repair at home

    You will need new head bolts. The factory ones are torque to yield and can not be reused. You might as well replace all lifters on that side while you're in there too and if it were me, I'd do both sides. The lifter cup should be OK, no reason for the m to fail. Make sure you have a good...
  23. THarber

    Cv axle issues on lifted tahoe

    Visit the DMAX store
  24. THarber

    04 Silverado started knocking, what could it be? Rebuild started

    Sounds like valve train to me. Pull valve covers first and I bet you'll find a tossed rocker arm and possible bent push rod.
  25. THarber

    anyone ever replace the center link?

    As stated looks like idler arm to me. Refrain from over torqueing the idler arm to center link.

Forum statistics

Threads
132,375
Posts
1,866,966
Members
97,006
Latest member
BK613

Latest posts

Top