I checked the mirror connectors for the 2015-2017 Tahoe and Escalade on the GMSi site and the pin outs are the same. So in theory you should be able to source one from 2015-2017.
There’s two things to address. An additional USB cable(s) and a different wiring connector for the video input module (I’m working on a pigtail instead of having to re-pin with a new connector).
Working on sourcing the usb cables... There’s an additional one with the center console harness...
gmwholesaledirect.com
You also have to order the mirror covers and have them painted to match. You might luck up and find your marching color on eBay.
Sent from my iPad using Tapatalk
Added some dust caps to the hub while doing a tire rotation on my 2015i Yukon. Now my CV axle nuts are covered. Crazy that GM omitted these. I used caps from a K2XX HD truck.
Before
After - thought I had a pic before I put the wheel back on.
@Kittmaster here’s the wiring schematic for the wireless charging module.
You can see where the wires eventually land in the center console connector (X300), then on to the left body harness to I/P connector(X225) and finally break out to a fuse block, the BCM and one of the body grounds.
Please report back about the charging indicator if you replace the harness. I’m curious if any programming of the HMI or BCM is needed for it to work.
Sent from my iPad using Tapatalk
Yes, the 2018 version is better. It can be swapped in and made to work in earlier models with an adapter pigtail from pgamboa (he frequents another forum). The 2018 connector to the charging module is different.
Although, you’d still have to address getting power/ground back there if the...
You won’t need to buy another cluster. It’s my understanding you will need the Denali cluster programmed to have the HUD feature enabled in it. You don’t have to program the HUD unit itself.
That’s a shot of the second row captains chairs. The install was easy. You just have to pay attention to fit the pieces together properly. I can see how not doing so would cause fitment issues. I’ll post more pics below.
Here’s a pic of the harness from the Esky mirrors to the Esky door harness.
Here’s a pin-out of the camera jumper harness.
Sent from my iPad using Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.