Escalade side mirrors on a Tahoe LTZ!

[tomsquad418]

I have the MVI kit ordered. Front and side cameras, but the intent of using the oem Escalade side camera

There also appears to be a kit from ADC Mobile which looks exactly like the kit from MVI. However, this kit is cheaper and looks legitimate and reputable. It may even work better due its cameras and that is $499.00. Each kits were on sale around the holidays. I wonder if you could hollow out the esky mirrors and run the ADC or MVI cameras through the housing? Each one has the phone mirroring as well... I think it is not additional cost at ADC.

 

[tomsquad418]

It is. Almost too “cute”.

However, I found a few distributors (adcelectric?) that sell for about $500? There were a few others as well for about $600.

https://www.adcmobile.com/product/multi-camera-interface-for-chevrolet-vehicles/

Here is the install manual:
http://www.rostra.com/manuals/Rostra-250-8450-8451-Installation-Manaul-8302016.pdf

It looks like it uses RCA for camera inputs. Not sure how the Cadillac are wired?

Whoops hadnt seen your post yet. Great minds think alike!

 

[Rockytfox]

I'm curious about this statement: "NOTE: Requires vehicle be equipped with 8″ display radio Radio / HMI module combination (RPO Code IO5 & IO6). 2017 vehicles with rear-seat entertainment system and/or one-piece radio systems (4.2″ or 7″) are not applicable."

I have a 2016 with the RSE...I wonder if this would work for that setup or not?

 

[cmatt]

IO5 is the 8 inch display without navigation. IO6 is with navigation.


Sent from my iPad using Tapatalk

 

[cmatt]

Here’s a pic of the harness from the Esky mirrors to the Esky door harness.



Here’s a pin-out of the camera jumper harness.



Sent from my iPad using Tapatalk

 

[tomsquad418]

It would

I'm curious about this statement: "NOTE: Requires vehicle be equipped with 8″ display radio Radio / HMI module combination (RPO Code IO5 & IO6). 2017 vehicles with rear-seat entertainment system and/or one-piece radio systems (4.2″ or 7″) are not applicable."

I have a 2016 with the RSE...I wonder if this would work for that setup or not?

uld

 

[cmatt]

Those circuits land in the door to body harness connector at positions 4, 11, 12, 13 & 26.








Sent from my iPad using Tapatalk

 

[Rockytfox]

It would

uld

Please forgive me. I'm not sure what that means. "uld"

 

[tomsquad418]

Please forgive me. I'm not sure what that means. "uld"

Sorry - typo! I meant to say “it would work” like above...that must of just carried over or under rather.

 

[Ken G]

Following....Just picked up the wife's Tahoe last night and as soon as we got home she complained about how small the mirrors were compared to her old one lol. I can't believe how cheap the Esky mirrors are compared to the trucks when I did the DL3 upgrade on my '16 Rado I hunted for months and finally found a guy dumping a set for $35!!! compared to the $500-$600 I was seeing so I lucked out! But the size would be the biggest benefit but if we can find a way to make the 360 work it would be awesome. If I can find the time I'm gonna look through the upfitter manual and see if I make any headway if someone hasn't already found the answer.