Search results

  1. 0

    Normal oil pressure 6.0 Vortec

    30-50.............
  2. 0

    Race gas safe for 02 sensors

    Just buy some MS109 and mix some in with your fuel.
  3. 0

    Suspension Suggestions Please

    Id take off the auto air level in the back and delete the autoride shocks and install Bilstien 4600 shocks.
  4. 0

    Transmission Concern..

    First and foremost check the fluid level and color. And it never hurts to service the trans.
  5. 0

    Multiple Codes seem to be connected need help

    Glad you got it sorted out.
  6. 0

    Timing Chain?

    Yeah if you have the balancer off the job is cake. Id throw a Melling 10295 pump on it while I was in there and a GM LS2 chain and sprockets.
  7. 0

    replaced my passenger front wheelhub assembly today

    Yeah two for 65 are china junk.
  8. 0

    Multiple Codes seem to be connected need help

    I wouldnt replace the regulator unless it tests bad.
  9. 0

    spark plug anti seize

    Anti seize on the threads and die electric on the tips.
  10. 0

    Air Intake

    Jenna is right, its snake oil.
  11. 0

    6.0 what grade fuel

    You don't tune for a living do you? Cause you sound foolish. Then you need a tune up or other routine maintenance.
  12. 0

    replaced my passenger front wheelhub assembly today

    Complete china junk for that price.
  13. 0

    Multiple Codes seem to be connected need help

    Drive it around and see if it will give you a specific cylinder number for a misfire.
  14. 0

    Oil fill tube replacement

    Yes it turns and comes out. Ive seen the orings swell and not seal well before.
  15. 0

    Multiple Codes seem to be connected need help

    Clean MAF and replace both o2 sensors and I bet your issues go away.
  16. 0

    Need to replace water pump

    Yep id go with whatever budget allows. Its not a difficult job so nothing to worry about.
  17. 0

    Preparing to replace 4L60e myself.

    I wish it had a solid figure about exactly how much pressure could be adapted. That would tell a lot of the story. If its design is only to compensate for component wear, then common sense makes me think its very limited by design.
  18. 0

    Preparing to replace 4L60e myself.

    We are all here to learn, so I'm glad that was posted. But my take is slightly different....not disputing what that said but I seriously question the practical application and scope of this system and its capabilities. The reality I see is, im not gonna lie, stock 4l60Es shift like ass. Ive...
  19. 0

    Muffler

    Should just be a standard huge muffler, likely 2.5 inlet/outlet.
  20. 0

    Rear sway bar links

    Heres a pic of the DJMs, notice they are offset to move the swaybar over.
  21. 0

    Muffler

    What make and model truck you have?
  22. 0

    Rear sway bar links

    I have the djms also, I believe they were approx 6 inches long.
  23. 0

    Preparing to replace 4L60e myself.

    There is no table in the pcm that indicates adaptive capabilities. Now the 6l80e with a dedicated tcm there absolutely is, and they are a bugar to tune correctly.
  24. 0

    No reverse lights. Wheres the back up lamp switch?

    Yes its on the trans
  25. 0

    Preparing to replace 4L60e myself.

    This is a shop, Pro1 Trans in texarkana. Known by ALL the racers in the area.

Forum statistics

Threads
132,690
Posts
1,872,602
Members
97,500
Latest member
rickprado

Latest posts

Top