Normal oil pressure 6.0 Vortec

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

95escahoe

Full Access Member
Joined
Aug 2, 2010
Posts
5,155
Reaction score
4,454
What is the normal oil pressure range for a 6.0 Vortec? At idle and under acceleration


Sent from my iPhone using Tapatalk
 
OP
OP
95escahoe

95escahoe

Full Access Member
Joined
Aug 2, 2010
Posts
5,155
Reaction score
4,454
What year are you working with


Sent from my iPhone using Tapatalk

Thanks, was just curious it's an 04 Esky 6.0 has 160k and change idles a lil under 40, and going down the road it's 40+ about the same as my 03 Silverado with 116k


Sent from my iPhone using Tapatalk
 

mals

Full Access Member
Joined
Jun 18, 2016
Posts
332
Reaction score
363
Location
Western Mass
Idles a lil under 40, and going down the road it's 40+

You might want to do a quick test. Turn the ignition to the run position without starting it and watch the gauges energize. If it oil pressure needle sticks at ~40psi with the engine off (i.e. no pressure) you have a bad oil pressure sending unit. Mine was like that when I bought it with 156k. Cheap part to replace, but it is on the back of the block against the firewall. I watched a few youtube videos and did it all by feel while laying across the top of the engine. Now it reads accurately, and actually changes between idle and driving.
 

Jimmy John

Member
Joined
Nov 2, 2016
Posts
69
Reaction score
7
Not sure what you mean by "sticks at ~40psi" ? What should the gauge do when key is turned on but engine is off?
 

Forum statistics

Threads
132,690
Posts
1,872,605
Members
97,501
Latest member
Suburban2500

Latest posts

Top