Yea it was a tough one. I had searched before for any evap fuses but this one didn't come up until I searched for evap wiring diagrams.
Here is the pic. This is the under hood fuse box. Circled in red
Also here is the evap system info and troubleshooting.
Final update. If anyone has the vent solenoid code, check your 4ws fuse under the hood. Apparently the vent solenoid under the truck gets power from the 4 wheel steering fuse regardless whether you have quadrasteer or not...
So after finding that out and putting a fuse in, my evap codes are...
Update: purge valve on intake is working properly, it's controlling vacuum via PWM. I have good vacuum down to the charcoal canister. If I unhook the vent and tank evap lines from the canister I have good vacuum at those ports. My problem is if I hook up the tank line and leave the vent line...
Are you 100% it's coming from the rear? I had my front u joint making noises and by listening to it inside and outside I could swear it was the rear end. (I replaced the rear u joint 1 month prior)
Ended up being the front one but the sound traveled through the drive shaft and made it sound...
How long has it been on Craigslist? Sometimes it takes a little while. Also agree with everyone else on fixing most things.
Also make sure it's still on Craigslist, sometimes it will get flagged and taken down.
Hey guys, so I have hade code P0449 on my truck for a while now haven't cared but now it's time for state inspection and I need to pass... so I have replaced the gas cap, evap solenoid by the gas tank and the purge valve on the intake... still have the dang code. Any one have any ideas? I'm...
I test fit a diamond D3 10 and it fit. I could easily fit 2, 3 would be harder but do able. Could definitely fit 4 8's there... I don't care if mines flush with the floor or not, just don't want rear fire and having my wife poke a hole through a sub. Haven't tried the 10 there yet to see how the...
What amps? May be able to stack them under the 40 side. You could mount them to the back of the seat, there isn't much structure there, so most likely undo the seat cover hook at the bottom of the back rest and peel it up some to see what's there you can attach to. Also there is that folding...
Really? I have never seen a NBS 3rd brake light with any less out. The one on my barn door is the same one they used on s10 blazers though, different from yalls
2015 06 10 11.10.36 by YukonXL04 posted Jun 10, 2015 at 11:14 AM
Make your own. Factory housings blacked out with chrome shrouds Quads fool! by YukonXL04 posted Apr 11, 2015 at 11:21 PM
There is room behind/above the glove box. I didn't mean inside it. In some years I believe the factory amp was there to begin with.
Also you will have to change out the passenger lower dash/glove box panel for one without a console as well. It runs the full length back to the drivers panel. The...
No I didn't have any bose. Also running all aftermarket audio setup. You should be able to relocate the factory amp to above the glove box... you might have to extend the wires though... as for the sub you could swap out to the sub/box setup in the 99-02 or just move the stock sub box to under...
Delcity had pretty good prices for quality stuff. I haven't been impressed with my connectors I have gotten from eBay and amazon China stuff.
You shouldn't be able to loosely fit 2 18ga wires in a 18-22ga connector....
You can only swap with 99-02 gm full size trucks and suvs. Those are a direct bolt in. I believe you can make the 03-06 work but it will probably take some mods
So after thinking about it. I think I'm going to try to build a downfire box that fits in right behind the 2nd row that fits in the large hole that's there. Should be easier to make and come up with more airspace and more mounting depth. I'm going to test it with 1 10. And if it does well then I...
Do you have it in network mode? If so then I believe you lose the fade function as its made for an active front stage. You need to check this because you may only be sending cetain frequency ranges to front and rear speakers instead of full range to both.
It is the same signal from the amp. You didn't say if you put in component or coaxial speakers. If coax then the woofer is blown or the tinsel leads on the woofer part broke. If component then you may have some wires messed up between the external crossover and the woofer, or again the woofer is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.