Search results

  1. Chvyguy

    Rocking from left front to rear rear

    No sir, I have been busy myself and haven't had a chance to look at it. Hoping to look at it in the next few days. @bigdog9191999
  2. Chvyguy

    Rocking from left front to rear rear

    Thank you @bigdog9191999 for the response. I just replaced the shocks a few months ago so hopefully that isn't the case. I'm going to look at the bushings and bumpstops first and then look over the whole front suspension as well. I will let you know. Again I appreciate the response.
  3. Chvyguy

    Rocking from left front to rear rear

    Can't quite seem to figure out what is causing what I think of as body roll on my 2005 Yukon XL 1500. When going down the road if it is slightly bumpy then it bounces, starting at the right rear, up to the front drivers side, and if I just move the steering wheel slightly each direction real...
  4. Chvyguy

    Let's see Your Before and After pics

    Don't have a front end shot before I installed the billet grille. I bought it with the factory grille in it.
  5. Chvyguy

    Let's see Your Before and After pics

    The rear end after photo was before it was lowered.
  6. Chvyguy

    How does your gmt800 truck look right now ?

    Mine as of Wednesday when the lowering kit was put on.
  7. Chvyguy

    Official 00-06 Tahoe/Yukon/Escalade drop guide with pics...

    Thank you @kwOH and @Tonyrodz ! I will give it a little time and recheck it. Appreciate all the feedback.
  8. Chvyguy

    Official 00-06 Tahoe/Yukon/Escalade drop guide with pics...

    I agree that I would rather it be level or a 1/2" higher in the back than in the front. I will have to talk to him or figure out how to fix it myself when I am off next week. Appreciate the feedback.
  9. Chvyguy

    Official 00-06 Tahoe/Yukon/Escalade drop guide with pics...

    What are the potential issues? I had a co-worker install it for me since I just got done moving and didn't have the time.
  10. Chvyguy

    New fog lights

    Finally got my smoked fog lights installed! The glass had been missing on the old ones for years and I finally done something about it.
  11. Chvyguy

    Official 00-06 Tahoe/Yukon/Escalade drop guide with pics...

    Finally got my Belltech lowering kit on that I bought from @NORCAL SS last year! 2/4 drop Front- 35.5" and dropped to 33.5" Back- 36" and dropped to 33" Not really concerned with the 1/2" difference.
  12. Chvyguy

    Spyder Halo Projector lights

    Got my Spyder Halo Projector lights and parking lamp housings put in today making the front end look even better! Appreciate everyone on these forums because you all give me ideas to modify the Yukon and how to details to fix things too.
  13. Chvyguy

    Murdered out the front and rear

    It is Rust Oleum Gloss Black Peel Coat. Similar to the plast-dip but already had the glossy finish to it. It should last quite a while because I put at least 6 coats on it. Plan is to actually have it all painted when I get the hood and roof painted. For prep all I did was scrub the parts...
  14. Chvyguy

    Murdered out the front and rear

    Transforming the black bus (05 Yukon Xl) a little at a time! Got the front murdered out today! Even sprayed the front air dam and valance. Spyder halo projector lights are here (black housings, clear lenses) and waiting on the parking lamps to arrive today or tomorrow. Also did the back...
  15. Chvyguy

    05 Yukon Roof Racks

    Oh ok. Thank you. I agree there are way too many of them out there and got to make them stand out somehow.
  16. Chvyguy

    05 Yukon Roof Racks

    That looks a lot better. Smooth and clean. Did you tint your headlights or buy them like that?
  17. Chvyguy

    Can I paint my Depos

    Where can I find the thread where you did the lights?
  18. Chvyguy

    05 Yukon Roof Racks

    When you get the roof rack off I would be curious to see pictures with it gone and the running boards gone. I have considered doing that to mine as well.
  19. Chvyguy

    Battery voltmeter

    Thank you @mizzouguy ! I am looking at the stepper motors right now on Ebay. Looks simple but not sure about doing the soldering myself. Might give it a try, if not I will contact the guy who replaced all of them a few years ago fir me. I am just glad to figure out what it was.
  20. Chvyguy

    Battery voltmeter

    Ever since I put the new battery in the truck has been running great. Either the stepper motor is out or the needle has broken on the voltage gauge. It moved to 14 the day after everything happened then slowly went back down to 14. The next day it was up to 19 and now it is literally pointing...
  21. Chvyguy

    Battery voltmeter

    Ok. I will start checking all of my connections and see if I come up with anything. I appreciate your reply!
  22. Chvyguy

    Battery voltmeter

    I don't have a voltmeter but I will ask around at work and I am sure I can find someone. I appreciate your reply. He may have said volts but I had been up for so long after working my 12 hour shift that I may have heard him wrong.
  23. Chvyguy

    Battery voltmeter

    I got in my 05 Yukon XL this morning after work and it wouldn't start. Ended up jumping it after a little bit but the battery voltmeter on the dash stayed 9 the whole 32 miles home. I go to Autozone and have them check the battery and the alternator both. Battery was 99% charged and he said...
  24. Chvyguy

    Street Style Fender Flares

    Ok. I will look for one of those products when I am off work again. Thank you for the feedback.
  25. Chvyguy

    Street Style Fender Flares

    No he didn't coat them with anything. What should I put on them? Wax? @TheAutumnWind

Forum statistics

Threads
132,810
Posts
1,874,626
Members
97,661
Latest member
eKsiSLe

Latest posts

Top