Search results

  1. skyhighsami

    H pipe or x pipe??

    Why not run 2 pipes all the way to a dual inlet dual outlet muffler with an internal X? If not add an X as close to the motor as possible were the exhaust is hottest and has the most energy. As is cools the more energy it looses
  2. skyhighsami

    What octane for BB tune?

    Yes, ask the person you are getting the tune from. I got me a 93 tune in my 1500 I used to have and it made a huge difference
  3. skyhighsami

    Esky 3rd brake light

    I thought you had to replace the whole back glass. I read that at one point, I would like to have the Esky brake light as well but I have the liftgate and I can only find a replacement for the barn doors
  4. skyhighsami

    Hopefully a simple question. 2005 Yukon Denali XL AWD. Lowering.

    Emay, I want to know more about your hood man.....that is a bad *****. How much is yours lowered?
  5. skyhighsami

    Bilstein rear shocks

    Belltech 5305 5" coils with Bilstein shocks and shock extenders. On my Yukon XL it isn't exactly what I want so I ordered helper bags to finish it off.
  6. skyhighsami

    Extra 1" of drop. How to.?

    I did 3" DJM coils in the back of a Tahoe and decranked the keys in the front enough for it to sit level. The truck aligned fine, and rides great. If you loosen the keys you are taking tension off, if you tighten the keys you are tightening and adding tension.
  7. skyhighsami

    Ground Force springs

    If you do a search you will find more than enough info for a coil spring selection. Belltech 5305 or DJM Direct is a wealth of knowledge with trying stuff
  8. skyhighsami

    ok the panhard is going bye bye!!!

    Why instead of trying to reinvent the wheel don't you just shorten the panhard bar slightly or build a shorter one to correct the pivot point? I noticed when mine was lowered that one wheel was much closer to the wheelwell than the other, but I threw a spacer on there and let it ride. My vote...
  9. skyhighsami

    baggin an 01 kon

    Read.....he said and gave the link
  10. skyhighsami

    can i use LCA and Spindles together

    I will say this. I have Bilsteins with 5305s and DJM lower control arms on my Yukon XL. What works on a Tahoe will not work the same on a Yukon XL or Suburban. I took a lowering kit off my wife's truck because it rode too rough and put it on a Tahoe.....rode stock. Granted mine weighs a good bit...
  11. skyhighsami

    3-5 DJM kit with shocks.

    Offers?
  12. skyhighsami

    3-5 DJM kit with shocks.

    I the 3-5 kit from my wife's 2004 GMC Yukon XL from DJM. It it the control arms, coils, and shocks. You will need the rear hardware kit from DJM. I want 300+shipping for everything.
  13. skyhighsami

    Air Lift helper bags

    Have you figured anything out yet?
  14. skyhighsami

    Air Lift helper bags

    I have done the free travel mod. Maybe her's weighs more? When I swapped interiors I did put down 200 square feet of Second Skin Damplifier Pro and it has a custom fiberglass box for the sub. I will order them tonight along with some spindles.
  15. skyhighsami

    03' Yukon Body Drop

    I call complete BS unless you are only replacing the coils and decranking the torsion bars. There is no way you can install a lower control arms or spindles, the rear hardware kit, and shocks in 2 hours. Unless you are railing Meth off the hood as you jack it up.
  16. skyhighsami

    Air Lift helper bags

    How much will they help to soften the rear out? I replaced the DJM garbage 5" coils with 5305s and the junky ass DJM shocks with Bilstein HDs on Friday. It rides better but I was wondering how much the helper bags will help. The problem now is the springs are so much softer that the rear bottoms...
  17. skyhighsami

    Finished the Burb, now take it off...

    I hope the people that have your boat for sale do better work than their spelling. Damn
  18. skyhighsami

    Used lowering kits?

    You can get the rear hardware kit from DJM. I will send you the control arms, coils, shocks, and rear shock relocators for 350+shipping if you like. The other stuff is still on my wife's truck. Let me know if you want it all
  19. skyhighsami

    Just picked up a 2007 Z71 Suburban

    You bumped a thread that is 6 months old to put ... in it as a post?
  20. skyhighsami

    corvette servo info

    I am not quoting this about any one person but I have seen alot of things said on this website that have little merit. With that in mind before you do something someone on here tells you make sure you do your own research from several different sources.
  21. skyhighsami

    Used lowering kits?

    I am going to try and get some spindles. If so I will have the control arms. You will need to order the rear hardware kit from DJM.
  22. skyhighsami

    Used lowering kits?

    I have DJM 5" coils, shock relocators, DJM shocks, and I can either send you lowering keys or 3" lowering control arms. If I can get some spindles I will use them and the keys, pull the control arms off and sell you them. I will have to look at the truck tomorrow and see if I like how it is...
  23. skyhighsami

    Finished the Burb, now take it off...

    You wouldn't be interested in trading the spindles for some DJM control arms would you? It would still be a 3" lowering kit in the front it would just be using lower control arms instead of spindles. I have a DJM kit on my wife's truck and I was told if I swaped the lowering control arms for the...
  24. skyhighsami

    Got my new shocks and coils have some questions

    I just got the kit put on and man did it make a world of difference. I need to see what I need to try next. Replacing the front DJM lower control arms with spindles? Put on some Eibach sway bars? Add the helper springs in the 5305 coils? Steering stabilizer?
  25. skyhighsami

    2/3 drop with 23" Rims....Where/how to get aligned after? Please Help!!

    I aligned mine to stock or as close as possible

Forum statistics

Threads
133,006
Posts
1,878,299
Members
97,948
Latest member
dylansmashed

Latest posts

Top